Kiloview

The RU01 is a 1U rackmount chassis with 4 slots for Kiloview's SDI/HDMI encoding and decoding cards (including the REN-1 in this same batch), mixed and matched to suit the workflow. It runs on dual...

The RN03 is a passive 3U rack-mount frame that houses up to 10 compatible standalone Kiloview N-series NDI devices (N3, N4, N30, N40, N5 and N6) in any mix, each still powered and networked...

The RMG-300 is a dual-channel 4K media gateway card for Kiloview's Cradle RU01/RU03 rackmount chassis, bridging IP-based video systems and signal formats from a single slot-in module. It decodes and...

The REN-1 is a dual-stream HD/3G-SDI to NDI|HX encoding card that slots into a Cradle RU01, RU03 or RU03S frame (pairs with the RU01 chassis drafted in this same batch), adding NDI|HX-compatible...

The N40 is a bidirectional UHD HDMI/NDI converter with a low-profile NDI interface, taking an HDMI input and providing a loopthrough output for local monitoring while converting to and from NDI. It...

The N30 is a bidirectional 12G-SDI/full-NDI converter: it encodes a 12G-SDI input to full NDI, or decodes an NDI stream back out to 12G-SDI, with a 12G-SDI loop-through for local monitoring on either...

The MG300 is a standalone IP Video Media Gateway -- a high-performance embedded device that decodes NDI|HX, SRT, RTMP, RTSP, TS-UDP and HLS streams out to SDI and HDMI. It handles multi-channel video...

The Multifunctional Video Converter (model KV-CV190) takes an HDMI, VGA or composite (CVBS) source and converts it to SD/HD/3G-SDI, outputting two simultaneous SDI feeds from the one source. It's...

The C1 Mini Video Converter is a one-directional converter that takes a single channel of SD/HD/3G-SDI video and converts it to HDMI without damage, splitting the embedded SDI audio and re-embedding...