The Teradek Bolt 6 XT Receiver takes zero-delay wireless video on the 5 GHz and 6 GHz bands and outputs up to 4K60 10-bit 4:2:2 HDR over 12G-SDI, with an HDMI 2.0 output alongside. The 750 and 1500 versions come with no mount, a Gold Mount or a V-Mount battery plate, and the MAX with a Gold Mount or V-Mount plate.

How far it reaches

Line-of-sight range is up to 750 ft or 1,500 ft, and the MAX reaches up to 5,000 ft with the optional Array Antenna and Broadcast Mode. Each receiver has five external 2 dBi V (vertical) antennas, and the 1500 and MAX are also supplied with two H (horizontal) antennas for difficult RF.

Outputs, scaling and LUTs

The 12G-SDI and HDMI 2.0 outputs carry formats from 720p50 to 4Kp60, with frame rate and resolution scaling, and the receiver applies 17x17x17 3D LUTs with 10-bit colour. Two channels of embedded audio come through with the picture, along with metadata, timecode and start/stop flags from most camera manufacturers, and delay is under 0.001 seconds.

More receivers on one transmitter

A transmitter feeds up to six receivers. In Broadcast Mode a MAX transmitter feeds an unlimited number of paired MAX receivers; the 750 and 1500 receivers don't link to a MAX transmitter in that mode. The link is AES-256 encrypted with RSA-1024 key exchange, and up to six sets can work in one location.

Power, mounting and the box

It runs on 6 to 28 V DC through a locking 2-pin connector, has 1/4-20 and 3/8-16 mounting holes and is set up through an on-screen menu with joystick navigation. Without a battery plate it measures 112 x 139 x 27 mm and weighs 430 g. Every version comes with a 2-pin to P-Tap cable, a 12G-SDI cable, a 30 W AC adapter, five V antennas and a USB-A to USB-C cable. Battery-plate versions add front and rear battery cover plates. Part numbers: 10-2302 and 10-2312 (750, 1500); 10-2302-G, 10-2312-G and 10-2322-G (Gold Mount); 10-2302-V, 10-2312-V and 10-2322-V (V-Mount).