Accessories

The Miller 860 quick release plate is a replacement for select Arrow fluid heads. The specific heads this plate works for are the Arrow 25, Arrow 40 and Arrow 55 fluid heads.. For Arrow Fluid Heads1/4-20 and 3/8" Camera Screws

This 4.7"-long Standard Camera Plate from Miller is designed to fit AIR, DS10, DS20, Compass, CompassX fluid heads. The sliding quick release plate features approximately 2.4" of travel. The durable aluminum plate includes both 1/4"-20 and 3/8"-16...

The Miller 1/4"-20 Screw & Pin Adapter is designed to insert into standard Miller camera plates from the bottom and provide you with a mounting screw and location pin. A top component secures the adapter from the top of the camera plate, and when a...

With 2x 3/8"-16 threaded screws. Replacement for DS-60 fluid head..

The Miller 1208 Camera Plate is a replacement quick-release sliding camera plate designed for use with the Compass20 fluid head.Mini Euro style quick release sliding camera platform with 60mm travelSuits Compass20 fluid headIncludes 1/4" & pin, and 1/4"...

The Miller 1223 Assistant's Front Box Adapter for Cineline 70 Head attaches directly to the tripod head via two supplied screws and has industry standard mounting studs, enabling any major brand assistant boxes to be quickly mounted and demounted during...

The Miller 1520 Solo DV Strap is a padded tripod carry strap designed for the Miller Solo DV series tripods. 1.5 inch wide tripod carry strap17 inch long shoulder pad. Compatible with;. Miller Solo DV tripods .

The 1590 Protective Leg Covers from Miller are intended for use with the Solo tripod series to provide protection for the upper leg sections during use and the operator's shoulders during transport. The 12.6" pads cover nearly the entire upper leg...

Designed to provide stable support the Hi Hat allows the mounting of a video fluid head to get great footage without shakes and vibrations at an extremely low camera angle. Available in a variety of different sizes - 75, 100, 150mm bowl and Mitchell base...

The three 3366 Heavy Duty Feet for Heavy Duty Tripod from Miller are made of molded plastic with a rubber pad and attach via a stud that has both 1/4"-20 and 3/8"-16 threads.. Replacement Feet for 3350 HD TripodMolded Plastic Foot with Rubber Pad1/4"-20...

The 75 to 100mm adapter, fits exactly into the 100mm bowl tripod allowing it to accept 75mm ball leveling heads..

The Miller 465 Hi Hat is meant for medium weight film and video cameras on fluid heads when the lowest possible point of view is desired. The 75mm bowl facilitates quick mounting and leveling with a minimum of fuss when working within a fast-paced...

The Miller 466 Hi Hat is meant for medium weight film and video cameras on fluid heads when the lowest possible point of view is desired. The 100mm bowl facilitates quick mounting and leveling with a minimum of fuss when working within a fast-paced...

The 475 Tripod Feet from Miller are a set of three rubber snap-on feet designed to be used in any situation where the integrated dual spiked feet are not optimal. They are ideal for use on both slippery and glossy floors. These rubber feet are compatible...

The 478 Tripod Feet from Miller are a set of three rubber snap-on feet designed to be used in any situation where the integrated dual spiked feet are not optimal. They are ideal for use on both slippery and glossy floors. These rubber feet are compatible...

The 550 Tripod Feet from Miller are a set of three rubber snap-on feet designed to be used in any situation where the integrated dual spiked feet are not optimal. They are ideal for use on both slippery and glossy floors. These rubber feet are compatible...

This Miller Pan Bar Handle is compatible with the Miller DS5, DS10, DS20, and Miller Compass 23 fluid video heads. It connects and locks into either side of those heads with a clamp and bolt for right- or left-handed use. A rubberized handle provides a...

The Miller 698 Telescopic Pan Handle with Clamp for Cineline 70 and Skyline 70 Head is made of black anodized aluminum tubing. This construction is designed to reduce flexing when using heavy pan and tilt drags and heavy loads..

The Miller 858 is an offset camera plate with additional travel range. This plate replaces the existing quick release plate and works with small camcorders that don't need specific camera adapter plates.. DV Cameras. This plate works well for mounting...

The Miller Air Accessory Mounting Block allows you to attach 1/4"-20 accessories on the side of the Miller Air Fluid Head. It supports up to 3.3 lb.. Attaches on the Side of Air Fluid HeadSupports 1/4" Accessories up to 3.3 lb

Mount additional accessories like a viewfinder, monitor, or light onto your AX or Arrow tripod fluid head with this AX Accessory Mounting Block from Miller. This solid metal alloy block attaches to your fluid head, allowing you to mount up to 6.6 lb of...

Mount additional accessories like a viewfinder, monitor, or light onto your CX or Compass tripod fluid head with this CX Accessory Mounting Block from Miller. This solid metal alloy block attaches to either side of your fluid head, allowing you to mount...

Mount your flat-based ArrowFX fluid head onto a tripod with a 100mm bowl using this D100 Claw Ball Level Adapter from Miller. This durable metal alloy adapter attaches to the flat base of the ArrowFX head or other compatible head via three M5 threads or...

Mount your flat-based ArrowFX fluid head onto a tripod with a 150mm bowl using this D150 Claw Ball Level Adapter from Miller. This durable metal alloy adapter attaches to the flat base of the ArrowFX head or other compatible head via three M5 threads or...

This 7.1"-long Long Camera Plate from Miller is designed to fit AIR, DS10, DS20, Compass, CompassX fluid heads. The sliding quick release plate features approximately 4.8" of travel. The durable aluminum plate includes both 1/4"-20 and 3/8"-16 camera...

The Miller Mitchell Base Adapter allows the Skyline 70 Fluid Head to be connected with a Mitchell base and can be used with heavy-duty Mitchell tripods..

The Miller Pan Handle for Compass15 and Compass20 Fluid Heads is a 16mm fixed-length pan arm. The main tube is black-anodized aluminum alloy and features a comfortable rubber grip.. 16mm Fixed Length Pan Arm

The Quick Release Adapter Plate from Miller features a sliding camera plate with 2.75" travel and is designed for the Solopod. It provides a convenient solution for flat base mounting and comes with 1/4"-20 and 3/8"-16 screws.. Quick Release Sliding...

Key Features. 50mm extension1/4" and 3/8" accessory screw holes.

This 3.5"-long Short Camera Plate from Miller is designed to fit AIR, DS10, DS20, Compass, CompassX fluid heads. The sliding quick release plate features approximately 1.2" of travel. The durable aluminum plate includes both 1/4"-20 and 3/8"-16 camera...

Key Features. Short grip for greater controlDurable hi-strength black alloy tubingComfortable rubber pan handle grip.

Mount additional accessories like a viewfinder, monitor, or light onto your Skyline 70 or Cineline 70 tripod fluid head with this Skycine Accessory Mounting Block from Miller. This solid metal alloy block attaches to either side of your fluid head,...

Key Features. Supplied with black handle carrierDurable black anodized aluminum tubingMaterial alloy/rubber.

The Euro-Style Quick Release Platform from OConnor can accommodate heavy camera rigs and is designed for use with the OConnor 2575D, 120EX, 2560, and 2065 series of fluid heads. The included large European-style touch and go plate enables rapid mounting...