Miller
Miller 860 Quick Release Plate
860
$125.00
Inc. GST
$108.70
Ex. GST
The Miller 860 quick release plate is a replacement for select Arrow fluid heads. The specific heads this plate works for are the Arrow 25, Arrow 40 and Arrow 55 fluid heads.. For Arrow Fluid...
Miller
Miller Standard Camera Plate for AIR, DS10, DS20, Compass, CompassX Heads (2.4")
1205
$129.00
Inc. GST
$112.17
Ex. GST
This 4.7"-long Standard Camera Plate from Miller is designed to fit AIR, DS10, DS20, Compass, CompassX fluid heads. The sliding quick release plate features approximately 2.4" of travel. The durable...
Benro DL06 Dolly
DL06
$161.00
Inc. GST
$140.00
Ex. GST
The Benro DL06 Tripod Dolly allows you to move your tripod across the floor to reposition your camera. It features three casters and independent wheel locks that prevent the wheels from both rotating...
Miller
Miller 1/4"-20 Screw & Location Pin Adapter
493
$45.00
Inc. GST
$39.13
Ex. GST
The Miller 1/4"-20 Screw & Pin Adapter is designed to insert into standard Miller camera plates from the bottom and provide you with a mounting screw and location pin. A top component secures the...
Miller
Miller 1060 Camera Mounting Plate with Two 3/8"-16 Screws - for DS-60 Fluid Head
1060
$259.00
Inc. GST
$225.22
Ex. GST
With 2x 3/8"-16 threaded screws. Replacement for DS-60 fluid head..
Miller
Miller 1208 Camera Plate for Compass20 Fluid Head
1208
$125.00
Inc. GST
$108.70
Ex. GST
The Miller 1208 Camera Plate is a replacement quick-release sliding camera plate designed for use with the Compass20 fluid head.Mini Euro style quick release sliding camera platform with 60mm...
Miller
Miller 1223 Assistant's Front Box Adapter for Cineline 70 Head
1223
$795.00
Inc. GST
$691.30
Ex. GST
The Miller 1223 Assistant's Front Box Adapter for Cineline 70 Head attaches directly to the tripod head via two supplied screws and has industry standard mounting studs, enabling any major brand...
Miller
Miller 1520 Solo DV Strap - for Miller Solo DV Tripods
1520
$55.00
Inc. GST
$47.83
Ex. GST
The Miller 1520 Solo DV Strap is a padded tripod carry strap designed for the Miller Solo DV series tripods. 1.5 inch wide tripod carry strap17 inch long shoulder pad. Compatible with;. Miller Solo...
Miller
Miller 1590 Protective Leg Covers for Solo Series Tripods (3)
1590
$105.00
Inc. GST
$91.30
Ex. GST
The 1590 Protective Leg Covers from Miller are intended for use with the Solo tripod series to provide protection for the upper leg sections during use and the operator's shoulders during transport...
Miller
Miller 255 Hi-Hat with 150mm Bowl
467
$1,225.00
Inc. GST
$1,065.22
Ex. GST
Designed to provide stable support the Hi Hat allows the mounting of a video fluid head to get great footage without shakes and vibrations at an extremely low camera angle. Available in a variety of...
Miller
Miller 3366 Heavy Duty Feet for Heavy Duty Tripod (Set of 3)
3366
$849.00
Inc. GST
$738.26
Ex. GST
The three 3366 Heavy Duty Feet for Heavy Duty Tripod from Miller are made of molded plastic with a rubber pad and attach via a stud that has both 1/4"-20 and 3/8"-16 threads.. Replacement Feet for...
Miller
Miller 378 75mm Ball Base Head to 100mm Bowl Adapter
378
$249.00
Inc. GST
$216.52
Ex. GST
The 75 to 100mm adapter, fits exactly into the 100mm bowl tripod allowing it to accept 75mm ball leveling heads..
Miller
Miller 390 Medium Duty Dolly - for DS Tripods
390
$1,559.00
Inc. GST
$1,355.65
Ex. GST
Medium Duty Dolly II for all Miller DS series tripods. Supports up to 100 lb (45.3 kg).125 mm wheels for light, smooth dolly action Independent wheel locks Folds down for easy carriage with carry...
Miller
Miller 391 Lightweight Dolly - for DS Tripods
391
$1,125.00
Inc. GST
$978.26
Ex. GST
The Lightweight Dolly is constructed from aluminum providing light, smooth dolly action. Features independent wheel locks and integrated rubber tripod stirrups. The Lightweight Dolly provides...
Miller
Miller 394 Lightweight Dolly for Solo DV/ENG Tripod
394
$955.00
Inc. GST
$830.43
Ex. GST
The Miller 394 Lightweight Dolly for Solo DV/ENG Tripod at 29" wide enables safe maneuverability through standard-size doorways. The max payload is 50 lb. The collapsed length is 22" and the total...
Miller
Miller 465 Hi Hat with 75mm Bowl- Supports up to 33 lb (15 kg)
465
$815.00
Inc. GST
$708.70
Ex. GST
The Miller 465 Hi Hat is meant for medium weight film and video cameras on fluid heads when the lowest possible point of view is desired. The 75mm bowl facilitates quick mounting and leveling with a...
Miller
Miller 466 Hi Hat with 100mm Bowl
466
$815.00
Inc. GST
$708.70
Ex. GST
The Miller 466 Hi Hat is meant for medium weight film and video cameras on fluid heads when the lowest possible point of view is desired. The 100mm bowl facilitates quick mounting and leveling with a...
Miller
Miller 475 Rubber Feet Pads for Select Tripods (Set of 3)
475
$215.00
Inc. GST
$186.96
Ex. GST
The 475 Tripod Feet from Miller are a set of three rubber snap-on feet designed to be used in any situation where the integrated dual spiked feet are not optimal. They are ideal for use on both...
Miller
Miller 478 Rubber Feet Pads for Select Tripods (Set of 3)
478
$739.00
Inc. GST
$642.61
Ex. GST
The 478 Tripod Feet from Miller are a set of three rubber snap-on feet designed to be used in any situation where the integrated dual spiked feet are not optimal. They are ideal for use on both...
Miller
Miller 480 Studio Dolly - for Sprinter and HD Tripods
480
$2,180.00
Inc. GST
$1,895.65
Ex. GST
The Studio Dolly is constructed from aluminum providing light, smooth dolly action. Features independent wheel locks and integrated rubber tripod stirrups. The Studio Dolly provides smooth and stable...
Miller
Miller 481 Studio Dolly with Cable Guards for Sprinter and HD Tripods
481
$2,895.00
Inc. GST
$2,517.39
Ex. GST
The Miller 481 Studio Dolly with Cable Guards for Sprinter and HD Tripods boasts adjustable cable guards for smoothing out studio floor litter, plus a reinforced centre hub with collapsible box...
Miller
Miller 483 Studio Dolly with Cable Guards and Tracking Locks - for Sprinter and HD Tripods
483
$3,810.00
Inc. GST
$3,313.04
Ex. GST
The 483 Studio Dolly combines height adjustable cable guards, for smoothing out studio floor litter, with independantly controllable wheel tracking. Tracking allows you to lock and glide the 483...
Miller
Miller 508 Telescopic Above Ground Spreader
508
$689.00
Inc. GST
$599.13
Ex. GST
The Miller 508 Telescopic Above Ground Spreader is designed for use with the 402 and the 420 2-stage tripods, and allows you to stably setup the tripods on uneven terrains, steps, and slopes. Made of...
Miller
Miller 550 Rubber Feet Pads for Select Tripods (Set of 3)
550
$165.00
Inc. GST
$143.48
Ex. GST
The 550 Tripod Feet from Miller are a set of three rubber snap-on feet designed to be used in any situation where the integrated dual spiked feet are not optimal. They are ideal for use on both...
Miller
Miller 681 Pan Bar Handle for Select Video Heads
681
$249.00
Inc. GST
$216.52
Ex. GST
This Miller Pan Bar Handle is compatible with the Miller DS5, DS10, DS20, and Miller Compass 23 fluid video heads. It connects and locks into either side of those heads with a clamp and bolt for...
Miller
Miller 698 Telescopic Pan Handle with Clamp for Cineline 70 and Skyline 70 Head
698
$509.00
Inc. GST
$442.61
Ex. GST
The Miller 698 Telescopic Pan Handle with Clamp for Cineline 70 and Skyline 70 Head is made of black anodized aluminum tubing. This construction is designed to reduce flexing when using heavy pan and...
Miller
Miller 835 Non-Adjustable Above-Ground Tripod Spreader - for 440 Tripod
835
$290.00
Inc. GST
$252.17
Ex. GST
A Mid-Level Spreader is chosen when shooting is often performed on uneven surfaces, such as steps, rocky ground, slopes. It allows for rapid set-up and pull down by keeping tripod legs at an equal...
Miller
Miller 858 Offset Camera Plate
858
$279.00
Inc. GST
$242.61
Ex. GST
The Miller 858 is an offset camera plate with additional travel range. This plate replaces the existing quick release plate and works with small camcorders that don't need specific camera adapter...
Miller
Miller 993 Mid-level Spreader
993
$1,109.00
Inc. GST
$964.35
Ex. GST
The Miller 993 is a mid-level spreader for Sprinter, Arrow 25/40 and HD tripod systems. This device offers variable adjustment in minimum and maximum height settings and a latch and swivel design....
Miller
Miller Air Accessory Mounting Block
2092
$75.00
Inc. GST
$65.22
Ex. GST
The Miller Air Accessory Mounting Block allows you to attach 1/4"-20 accessories on the side of the Miller Air Fluid Head. It supports up to 3.3 lb.. Attaches on the Side of Air Fluid HeadSupports...
Miller
Miller Arrowx Shell Case with Wheels for Sprinter II & HD Tripod Systems (Black)
3534
$1,050.00
Inc. GST
$913.04
Ex. GST
Store, transport, and protect your gear with the black Miller Arrowx Shell Case with Wheels for Sprinter II & HD Tripod System. The case features zipper closure, head-end cradle with straps to secure...
Miller
Miller Arrowx softcase 1 Stage for Sprinter II 1 Stage Tripod Systems (Black)
3500
$635.00
Inc. GST
$552.17
Ex. GST
Store, transport, and protect your gear with the black Miller Arrowx softcase 1 Stage for Sprinter II 1 Stage Tripod Systems. The case features zipper closure, top and bottom cradles with straps to...
Miller
Miller Arrowx softcase 2 Stage for Sprinter II and Toggle 2 Stage Tripod Systems (Black)
3502
$635.00
Inc. GST
$552.17
Ex. GST
Store, transport, and protect your gear with the black Miller Arrowx softcase 2 Stage for Sprinter II and Toggle 2 Stage Tripod Systems. The case features zipper closure, top and bottom cradles with...
Miller
Miller Articulated Pan Handle with Extender for Cineline 70 Fluid Head (15")
1230
$1,615.00
Inc. GST
$1,404.35
Ex. GST
Miller
Miller AX Accessory Mounting Block for AX and Arrow Fluid Heads
1260
$359.00
Inc. GST
$312.17
Ex. GST
Mount additional accessories like a viewfinder, monitor, or light onto your AX or Arrow tripod fluid head with this AX Accessory Mounting Block from Miller. This solid metal alloy block attaches to...
Miller
Miller Basic Mid-Level Spreader for 75 Sprinter II Tripods
593
$729.00
Inc. GST
$633.91
Ex. GST
Set up your tripod quickly and safely with this Basic Mid-Level Spreader from Miller. The spreader is compatible with 75 Sprinter II tripods and easily latches onto the tripod legs. The telescopic...
Miller
Miller Canvas Leadshot Bag with Carry Handle for Combo Live Pedestals (12.4 lb)
3294
$315.00
Inc. GST
$273.91
Ex. GST
Miller
Miller CX Accessory Mounting Block for CX and Compass Fluid Heads
1255
$359.00
Inc. GST
$312.17
Ex. GST
Mount additional accessories like a viewfinder, monitor, or light onto your CX or Compass tripod fluid head with this CX Accessory Mounting Block from Miller. This solid metal alloy block attaches to...
Miller
Miller D100 Claw Ball Level Adapter for ArrowFX Fluid Head and 100mm Bowl
1290
$529.00
Inc. GST
$460.00
Ex. GST
Mount your flat-based ArrowFX fluid head onto a tripod with a 100mm bowl using this D100 Claw Ball Level Adapter from Miller. This durable metal alloy adapter attaches to the flat base of the ArrowFX...
Miller
Miller D150 Claw Ball Level Adapter for ArrowFX Fluid Head and 150mm Bowl
1295
$755.00
Inc. GST
$656.52
Ex. GST
Mount your flat-based ArrowFX fluid head onto a tripod with a 150mm bowl using this D150 Claw Ball Level Adapter from Miller. This durable metal alloy adapter attaches to the flat base of the ArrowFX...
Miller
Miller Extension Tube Assembly for Combo Live Pedestals (12.4")
3290
$1,919.00
Inc. GST
$1,668.70
Ex. GST
Miller
Miller Ground Spreader for HD Tripod
3363
$1,855.00
Inc. GST
$1,613.04
Ex. GST
The Miller Ground Spreader for HD Tripod is a heavy-duty spreader that can be used with the 3350 HD Tripod. The design of this spreader makes it best suited for studio use or on even flooring.. For...
Miller
Miller Hard Transport Case for Cineline 70 Head
396
$3,125.00
Inc. GST
$2,717.39
Ex. GST
The Hard Transport Case for the Cineline 70 Head from Miller is designed to safeguard and protect the fluid head during transport and storage..
Miller
Miller HD Dolly for HD and Sprinter II Tripods
3222
$5,725.00
Inc. GST
$4,978.26
Ex. GST
The Miller HD Dolly for HD and Sprinter II Tripods provides a stable platform for smoothly rolling your tripod along a studio floor. The three dual ball bearing wheels let the dolly quickly swivel as...
Miller
Miller HD Dolly for HD Studio Tripod
3225
$6,645.00
Inc. GST
$5,778.26
Ex. GST
The Miller HD Dolly for HD Studio Tripod provides a stable platform for smoothly rolling your tripod along a studio floor. The three dual ball bearing wheels let the dolly quickly swivel as...
Miller
Miller HD Ground Spreader for HD MB 1-Stage Tripod
2130
$1,339.00
Inc. GST
$1,164.35
Ex. GST
The HD Ground Spreader from Miller is designed for use with the HD MB 1-Stage Tripod. It allows for rapid setup and pull-down by keeping tripod legs at an equal or preset distance relative to each...
Miller
Miller Hexagonal Transport Case for Heavy Duty 3350 Tripod (Black)
3380
$1,115.00
Inc. GST
$969.57
Ex. GST
Store, transport, and protect your Miller, heavy-duty 3350 tripod, or similar sized stands and other gear with the black Hexagonal Transport Case from Miller. This sturdy case is constructed from...