100mm Systems

Key Features 100mm Ball Head Supports up to 48.5 lb Lightweight Dual-Stage flowtech Tripod Mid-Level Spreader and Rubber Feet SpeedLevel Clamp for Quick Leveling Height Range of Approximately 28 to 68" 12 Steps of Counterbalance Speedbalance...

Key Features Cine 20 Fluid Head flowtech 100 MS Tripod Legs 66 lb Load Capacity 16-Step Counterbalance, 7-Step Pan/Tilt Mid-Level Spreader, Carry Handle, Bag Telescopic Pan Handle The flowtech 100 MS Carbon Fiber Tripod System with Cine 20 Fluid Head...

The OConnor Ultimate 1040 Fluid Head is a lightweight fluid head that shares features with the other fluid heads in the OConnor Ultimate fluid head line. This allows operators to easily transition between lighter and heavier cameras without having to...

30.9 lb Capacity CX14 Fluid HeadSprinter II 2-Stage Carbon Fiber Tripod23.7 to 66.6" Height RangeSet of Three Rubber FeetMid-Level SpreaderSoftcase for 2-Stage Tripod Systems

The Miller Sprinter II 1-Stage Alloy Tripod is a quick-setup solution for a tripod head with 100mm ball base. Its light weight, flip-locks, and rigid construction allow for durability without compromising usability in ENG, EFP, and other pro video...

30.9 lb Capacity CX14 Fluid HeadSprinter II 2-Stage Aluminum Tripod23.7 to 66.6" Height RangeSet of Three Rubber FeetMid-Level SpreaderSoftcase for 2-Stage Tripod Systems

The Miller Sprinter II 2-Stage Alloy Tripod is a quick-setup solution for a tripod head with 100mm ball base. Its light weight, flip-locks, and rigid construction allow for durability without compromising usability in ENG, EFP, and other pro video...

30.9 lb Capacity CX14 Fluid HeadToggle 2-Stage Aluminum Tripod22 to 68" Height RangeSoft Case for 2-Stage Tripod SystemsMid-Level Spreader and Shoulder Strap

30.9 lb Capacity CX14 Fluid HeadToggle 2-Stage Aluminum Tripod22 to 68" Height RangeSoft Case for 2-Stage Tripod SystemsGround Spreader and Shoulder Strap

35.3 lb Capacity Arrowx 1 Fluid HeadSolo 100, 3-Stage Carbon Fiber Tripod15 to 80" Height RangeSoft Case for 2-Stage Tripod SystemsRemovable Shoulder Strap

35.3 lb Capacity Arrowx 1 Fluid Head1 x Pan HandleSprinter II 2-Stage Carbon Fiber Tripod23.7 to 66.6" Height RangeMid-Level Spreader and Rubber FeetSoft Case for 2- Stage Tripod Systems

35.3 lb Capacity Arrowx 1 Fluid Head1 x Pan HandleSprinter II 2-Stage Aluminum Tripod23.7 to 66.6" Height RangeMid-Level Spreader and Rubber FeetSoft Case for 2- Stage Tripod Systems

35.3 lb Capacity Arrowx 1 Fluid HeadSprinter II 2-Stage Aluminum Tripod23.7 to 66.6" Height RangeOn-Ground SpreaderSoftcase for 2-Stage Tripod Systems

35.3 lb Capacity Arrowx 1 Fluid Head1 x Pan HandleSprinter II 1-Stage Aluminum Tripod32.8 to 62.8" Height RangeMid-Level Spreader and Rubber FeetSoft Case for 1- Stage Tripod Systems

35.3 lb Capacity Arrowx 1 Fluid HeadSprinter II 1-Stage Aluminum Tripod31.4 to 62.5" Height RangeOn-Ground SpreaderSoftcase for 1-Stage Tripod Systems

The Benro BV10 Twin-Leg Aluminum Tripod Kit is a complete tripod system ideal for studio applications and handling larger, fully rigged cameras weighing up to 22 pounds. The kit pairs the 100mm-ball BV10 video head with a twin-leg aluminum tripod. The...

Constructed with aluminum alloy with two-stage design, the Baby tripod, offers a 100mm bowl fixing, attached to a ball-leveling mount ensuring bowl-to-leg fastening, that eliminates joint instability. Featuring toggle leg clamping system, this...

The Miller CX10 Fluid Head is designed to accommodate a wide payload range with 16 steps of counterbalance. Pan, tilt, and counterbalance can all be set to zero, enabling even the lightest of cameras to be supported. Maxed out, this head is rated to...

The Miller CX10 Fluid Head is designed to accommodate a wide payload range with 16 steps of counterbalance. Pan, tilt, and counterbalance can all be set to zero, enabling even the lightest of cameras to be supported. Maxed out, this head is rated to...

The Miller CX10 Fluid Head is designed to accommodate a wide payload range with 16 steps of counterbalance. Pan, tilt, and counterbalance can all be set to zero, enabling even the lightest of cameras to be supported. Maxed out, this head is rated to...

The Miller CX10 Fluid Head is designed to accommodate a wide payload range with 16 steps of counterbalance. Pan, tilt, and counterbalance can all be set to zero, enabling even the lightest of cameras to be supported. Maxed out, this head is rated to...

The Miller CX10 Fluid Head is designed to accommodate a wide payload range with 16 steps of counterbalance. Pan, tilt, and counterbalance can all be set to zero, enabling even the lightest of cameras to be supported. Maxed out, this head is rated to...

The Miller Skyline 90 Fluid Head is designed to support large cine cameras and rigs weighing up to 165 pounds. While most camera rigs don't weigh that much, even smaller camera rigs can take advantage of the smooth and accurate mechanics offered by the...

The Miller Skyline 90 Fluid Head is designed to support large cine cameras and rigs weighing up to 165 pounds. While most camera rigs don't weigh that much, even smaller camera rigs can take advantage of the smooth and accurate mechanics offered by the...

The 3250 Arrowx 5 Combo Live 30 pedestal offers light weight portability employing an air adjustable column system that delivers perfect camera balance with precise, smooth, low noise in-shot elevation stroke.Dual ball bearing wheels individually fitted...

The Arrowx 7 Fluid Head from Miller is suitable for EFP, Studio, and Field OB applications. It offers a 13.2 to 55.1 lb payload range and seven selectable pan-tilt fluid drag positions. It features precision fluid drag with a 16-position CB Plus...

The Arrowx 7 Fluid Head from Miller is suitable for EFP, Studio, and Field OB applications. It offers a 13.2 to 55.1 lb payload range and seven selectable pan-tilt fluid drag positions. It features precision fluid drag with a 16-position CB Plus...

The Arrowx 7 Fluid Head from Miller is suitable for EFP, Studio, and Field OB applications. It offers a 13.2 to 55.1 lb payload range and seven selectable pan-tilt fluid drag positions. It features precision fluid drag with a 16-position CB Plus...

The Arrowx 7 Fluid Head from Miller is suitable for EFP, Studio, and Field OB applications. It offers a 13.2 to 55.1 lb payload range and seven selectable pan-tilt fluid drag positions. It features precision fluid drag with a 16-position CB Plus...

The Arrowx 7 Fluid Head from Miller is suitable for EFP, Studio, and Field OB applications. It offers a 13.2 to 55.1 lb payload range and seven selectable pan-tilt fluid drag positions. It features precision fluid drag with a 16-position CB Plus...

The Arrow X5 Fluid Head from Miller is suitable for use with ENG and EFP camcorders. It offers a 4.4 to 46.2 lb payload range and seven selectable pan-tilt fluid drag positions. It features precision fluid drag with a 16-position CB Plus counterbalance...

The Arrow X5 Fluid Head from Miller is suitable for use with ENG and EFP camcorders. It offers a 4.4 to 46.2 lb payload range and seven selectable pan-tilt fluid drag positions. It features precision fluid drag with a 16-position CB Plus counterbalance...

The Arrow X5 Fluid Head from Miller is suitable for use with ENG and EFP camcorders. It offers a 4.4 to 46.2 lb payload range and seven selectable pan-tilt fluid drag positions. It features precision fluid drag with a 16-position CB Plus counterbalance...

The Arrow X5 Fluid Head from Miller is suitable for use with ENG and EFP camcorders. It offers a 4.4 to 46.2 lb payload range and seven selectable pan-tilt fluid drag positions. It features precision fluid drag with a 16-position CB Plus counterbalance...