Wooden Camera Zip Box Pro 4 x 5.65" Matte Box (Swing-Away)
Wooden Camera Zip Box Pro 4 x 5.65" Matte Box (Swing-Away)
Availability:
Enquire for ETA
The Wooden Camera Zip Box Pro 4 x 5.65" Matte Box (Swing-Away) is a lightweight, compact matte box that attaches to 15mm lightweight rods and swings away for lens changes. Its three 4 x 5.65" filters load from the front and are held by a spring-loaded latch, and one or two can be tilted by offsetting them in the filter tray.
Two side screws on the swing-away bracket tilt the matte box and give 4mm of vertical adjustment above and below lens centre. The 114mm rear opening takes snap-in reduction rings for 110, 104, 95, 87 and 80mm lens barrels. A universal cloth donut covers other diameters and lenses whose front moves while focusing, and should be used whenever the matte box is tilted on the bracket.
The carbon fibre top flag covers the front to protect the lens between takes and comes off with one thumbscrew. A LW 15mm Adapter V2 (19mm or 15mm Studio) adapts it to studio rods, and the swing-away back can be swapped for a clamp-on back. It weighs 467.2 g and measures 228.6 x 76.2 x 203.2 mm.