Wooden Camera's LW 15mm Baseplate for the Canon C70 is a quick release baseplate that gives lightweight 15mm rod support at the correct lens height. The rods pass through from front to back and lock with two thumb screws on each side. ARRI standard M6 rosettes and 1/4"-20 threaded holes sit on both sides, with a 3/8"-16 ARRI accessory mount on the camera-right side.

An upper ARCA Swiss standard dovetail fixes to the bottom of the camera with a 3/8"-16 screw and locating pin and slides into the baseplate core, with a push-pull safety release pin for removal. There's also a vertical lens support post system.

The lower dovetail slot is ARRI standard, so it takes compatible ARRI dovetails or the included Quick Dovetail. With the Quick Dovetail fitted, the camera and baseplate go onto an ARRI standard bridge plate such as Wooden Camera's Quick Release Bridge Plate (19mm) or (15mm Studio). It weighs 400 g and measures 90 x 120 x 40 mm.