Wooden Camera's Elite Accessory System brings base plate, top plate, side rail, handle and EVF systems together for the Sony BURANO, and it's designed to take more accessories as the job needs them. The kit includes the Base Plate System and Top Plate System for Sony BURANO, a Side Rail Set, a Side Hook and Loop Plate, a Bolt-On Accessory Plate, an Ultra Handle System (3/8"-16 Universal), a Rosette Standoff, the EVF System and a Universal 15mm EVF Rail Extension.

Base and top plates

The Base Plate System is low profile and fits any bridge plate made to ARRI standard height. It keeps the centre of gravity low, and a rod clamp on each side resists torque and rotation from lens motors. The Top Plate System fixes to the camera with four 1/4"-20 screws, adds 1/4"-20 and 3/8"-16 mounting points and leaves room around the EVF connector on the assistant's side. Its Front Dual Rod Clamp secures rods with the 15mm Upper Rod Clamp.

Sides and accessory mounting

The Side Rail Set adds four 3/8"-16 and three 1/4"-20 anti-twist mounting points on each side, sensor plane markings and a front-facing 3/8"-16 point for accessories such as Bolt-On Rods for lens motors. The Rosette Standoff, ARRI standard with an M6 screw, extends the BURANO's built-in rosette past the side rails for accessories like remote control grips or handle extensions. The Bolt-On Accessory Plate adds 1/4"-20 and 3/8"-16 points for items like MDR boxes and wireless video units. The Side Hook and Loop Plate gives hook-and-loop space for timecode boxes or PL caps, and labels the ports behind it.

EVF placement

The EVF System mounts the BURANO's viewfinder on a Universal 15mm Rod Clamp. Its Universal EVF Accessory Rail Swivel Clamp rotates fully, and push-button safeties keep the EVF secure while giving a quick release. Fitted to a 15mm rod, the Universal 15mm EVF Rail Extension lets the EVF system slide along its built-in rail, with a safety pin to stop it slipping. The whole Elite Accessory System weighs 2835 g and measures 162 x 185 x 100 mm.