The Wooden Camera D-Box for Sony VENICE/VENICE 2 (V-Mount) is the V-Mount version of the D-Box that adds power distribution, standardised remote start/stop and hot swap to the camera. The main unit attaches to the back of the AXS-R7 or to the Gold Mount or V-Mount plate on the camera rear, and its Power Strip fixes to the camera's top right side through a 3-pin Fischer and the tape hook threaded hole.

Two 3-pin Fischer ports give 24V with run/stop and take any ARRI standard trigger, such as the UMC-4 or WCU-4. Two 2-pin ports (ARRI standard wiring) and two D-Taps give 12V unregulated, and USB gives 5V.

The 4-pin XLR DC input, like the camera's, takes an AC power supply, external power plate or VCLX block battery during a battery change and takes priority over the battery when the DC input voltage is between 12.9 and 18V. A processor-controlled amp limit, set to 3.8, 5.8 or 9A, replaces fuses: if accessories exceed it, only their outputs switch off and the camera keeps running. It weighs 484 g.