The SmallHD Ultra 5 Bolt 6 RX 750 Kit is an Ultra 5 monitor with a Teradek Bolt 6 750 receiver built inside, so you can watch the image from your camera wirelessly from up to 750 feet away, line of sight. It comes with monitor handles and a neck strap, in Gold Mount and V-Mount versions.

Receiving with Bolt 6 750

The built-in Bolt 6 RX is a real-time wireless video receiver that supports video up to 4Kp30 over HDMI with no image delay. It receives colour-accurate True HDR images in less than 0.001 seconds, with minimal image break-up.

A daylight-viewable 5-inch touchscreen

The 1920 x 1080 IPS touchscreen reaches 3000 nits, with a 1000:1 contrast ratio and 97% Rec709 coverage. A joystick, a back button and three large front-facing custom-function buttons sit around it, and PageOS 5 brings pixel zoom, focus assist, peaking, customisable false colour and 17-point and 33-point 3D LUTs.

Inputs, outputs and Camera Control

Connections cover full-size HDMI in and out, a 3G-SDI input and a second 3G-SDI that works as an input or an output, a 3.5 mm headphone jack with audio metering for up to 8 channels and an SD card slot. Its 5-pin locking USB and RJ45 Ethernet ports take SmallHD Camera Control for ARRI, Sony VENICE, RED DSMC2 and RED RCP2 cameras (KOMODO, DSMC3), so you can start and stop recording and set frame rate, shutter speed, ISO and white balance from the monitor. Each Camera Control licence and cable is sold separately.

Power and what's in the kit

Power comes in through a 2-pin locking connector at 10 to 34 V DC, or from a battery on the Micro Battery Plate. The box holds the monitor, monitor handles with a neck strap and a Micro Battery Plate. The anodised aluminium unibody weighs 646 g (22.8 oz) and measures 150 x 104 x 35 mm (5.91 x 4.08 x 1.36 in), or 203 mm (7.98 in) tall with the antennas. It has five 1/4-20 mounting points.