OConnor Ultimate 2575D Head & Cine HD Mitchell Top Plate Tripod System with Floor Spreader

The OConnor Ultimate 2575D Fluid Head includes the sinusoidal counterbalance system for true, accurate balance at any point in the tilt range and holds cameras up to 90 lb. It provides stepless, ultra-smooth pan and tilt fluid drag for improved control and stability for film-style shooting. The head comes with platform controls on the operator’s side of the head. The platform release lever with a one touch finger actuated safety release catch allows for one “finger” or hand action to undo the safety catch and open the lever.The Euro-Style Quick Release Platform from OConnor can accommodate heavy camera rigs and is designed for use with the OConnor 2575D, 120EX, 2560, and 2065 series of fluid heads. The included large European-style touch and go plate enables rapid mounting and demounting of your camera. A two-step lever at the rear of the platform locks the touch and go plate securely in place.This OConnor 2575-137 Top Half of Telescoping Pan Handle is compatible with the OConnor 2065, 2575, and 120EX fluid heads. Use its lever-based screw to connect the handle to a rosette on either side of the head for right or left-handed use. A separately available, cushioned bottom handle component is required to properly use this telescoping handle. The 30°-angled pan handle can rotate within its clamp for locking at your preferred orientation.The OConnor 2575-135 Bottom Handle Extension is designed to work with both 1030-246 and 2575-137 telescoping pan handles. This extension fastens onto the pan handle via a locking lever. It features a padded bottom grip for increased operating comfort.Mitchell base adapter allows mounting all Oconnor's Ultimate Series fluid heads (except Ultimate Digital 50-200 head) on Mitchell base tripods. Requires Mitchell base tiedown.The OConnor 08402 Mitchell Base Tiedown is the five-lobed retaining nut used with gear and fluid heads with Mitchell threaded post mounts. The OConnor 150 mm Tiedown is for the attachment of of 150 mm bowl-mounted fluid heads to OConnor tripods with 150mm receivers.It is not uncommon to encounter a barrage of exotic materials when perusing high-end support systems, but you'll find no such thing when you investigate the OConnor C12210001 Cine HD Tripod. Based on time-proven aluminum alloy metallurgy, there will be no surprises, and it requires no special accommodations. The single-stage design and die-cast spider ensure maximum rigidity for head and camera loads up to 309 lbs (140 kg), and the rotary stage clamps provide tool-free temperature-independent leg fixing. Concentrate on pressing production issues and forget about reinventing the wheel- your camera is safely suspended above the fray, and protected by the unbeatable OConnor 5-year parts and labor warranty.The OConnor C1221-00015 Ground Spreader is for use with the Cine HD tripod. It greatly enhances stability of the tripod with heavy loads while providing protection for delicate floor surfaces.Dual platform scalesPlatform with 4 handle rosettesSoft hand rest on left hand sideInfinitely adjustable counterbalance from 0 to 90 lb that can be altered easily with a collapsible counterbalance crank knob and numerical readoutStepless, ultra-smooth pan and tilt fluid dragControls located on the left-hand side of the head for intuitive cine-style shootingSingle stage design for maximum rigidityDie-cast alloy spider/receiver top stageRotary stage clamps are temperature-independentDual leg spikes for high and low angles

In The Box

• 1 x OConnor Ultimate 2575D Fluid Head Package
• 1 x OConnor C12210001 Cine HD Single-Stage Aluminum Alloy Tripod (Mitchell) - Supports 309 lbs (140 kg)
• 1 x OConnor C1221-00015 Ground Spreader for Cine HD Tripod