AJA SMPTE ST 2110 IP to SDI Mini-Converter

Featuring two 10 GigE SFP+ cages that support optional SFP+ modules of your choice, the converter allows you to connect an IP signal, which it decodes and formats for source monitoring and dual 3G-SDI output. Audio is output embedded as well as over L/R analog RCA jacks. The two SFP+ cages allow "hitless switching" so there's no loss of frame synchronization in critical applications. The converter has a compact, rugged, and fanless design suitable for use in studio and in the field.

• SMPTE ST 2110 audio and video receiver
• 2 x 3G-SDI outputs with mirrored source video
• Supports up to 1080p60, 10-bit, YCbCr 4:2:2 uncompressed
• Rugged, fanless design
• 2 x 10 GigE SFP+ cages with status lights for media LAN, allowing hitless switching (SFPs not included)
• 1 x 1 GigE RJ-45 port (with a status light) for control LAN — IEC 60603-7 for 10/100/1000 Base-T Ethernet (IEEE 802.3-2012)
• Full 10-bit pixel processing pipeline
• Embedded SDI audio output (up to 8 channels)
• L/R RCA analog audio output
• 1 x mini-USB 2.0 port (IEC 62680-1) for initial network configuration with AJA eMini-Setup software
• Complete control interface accessible on any Web browser from a built-in Web server
• Customizable control with AJA REST API
• HTTP/1.1 (RFCs 7230, 7231, 7232, 7233, 7234, 7235)
• Single-channel video input
• SMPTE ST 2022-7 dual-stream input for hitless switching
• Rx support for narrow/wide, gapped/linear modes
• Up to 16 channels of audio, 24-bit per channel, 48 kHz synchronous (streams with up to 16-channels are received but only the first 8 are output)
• 1 ms or 125 µs packet interval
• SMPTE ST 2022-7 dual-stream input for hitless switching
• 2 x 3G-SDI on BNC (single source, mirrored output)
• Up to 8 channels, SDI embedded audio, 24-bit per channel, 48 kHz synchronous
• L/R RCA analog audio levels at -10 dBu (nominal)
• 1 x BNC reserved for potential future updates
• NMOS Rx discovery and control according to standards IS-04 v1.2 and IS-05 v1.0
• Ember+ control (no discovery, control only)
• AJA REST API control (discovery via SSDP or MDNS)
• Supported over dedicated management Ethernet port and in-band over media ports
• PTP support compliant with PTP PTPv2 / IEEE 1588-2008
• SMPTE ST 2059-1 compliant
• Arista Networks SFP-10G-SR Compatible 10GBASE-SR
• Fiberstore SFP-10GSR-85 10G SFP+ 850nm
• Finisar FTLX1471D3BCL (for single-mode 1310nm)
• Mellanox MFM1T02A-SR 850nm 10G
• Maximum supported SFP+ power is 500 mW per SFP+ cage

In The Box

• 1 x AJA SMPTE ST 2110 IP to SDI Mini-Converter
• 1 x AJA DWP-U-R1 Worldwide Power Supply for AJA Mini-Converters
• 1 x Limited 5-Year Warranty

AJA SMPTE ST 2110 IP to SDI Mini-Converter

Featuring two 10 GigE SFP+ cages that support optional SFP+ modules of your choice, the converter allows you to connect an IP signal, which it decodes and formats for source monitoring and dual 3G-SDI output. Audio is output embedded as well as over L/R analog RCA jacks. The two SFP+ cages allow "hitless switching" so there's no loss of frame synchronization in critical applications. The converter has a compact, rugged, and fanless design suitable for use in studio and in the field.

• SMPTE ST 2110 audio and video receiver
• 2 x 3G-SDI outputs with mirrored source video
• Supports up to 1080p60, 10-bit, YCbCr 4:2:2 uncompressed
• Rugged, fanless design
• 2 x 10 GigE SFP+ cages with status lights for media LAN, allowing hitless switching (SFPs not included)
• 1 x 1 GigE RJ-45 port (with a status light) for control LAN — IEC 60603-7 for 10/100/1000 Base-T Ethernet (IEEE 802.3-2012)
• Full 10-bit pixel processing pipeline
• Embedded SDI audio output (up to 8 channels)
• L/R RCA analog audio output
• 1 x mini-USB 2.0 port (IEC 62680-1) for initial network configuration with AJA eMini-Setup software
• Complete control interface accessible on any Web browser from a built-in Web server
• Customizable control with AJA REST API
• HTTP/1.1 (RFCs 7230, 7231, 7232, 7233, 7234, 7235)
• Single-channel video input
• SMPTE ST 2022-7 dual-stream input for hitless switching
• Rx support for narrow/wide, gapped/linear modes
• Up to 16 channels of audio, 24-bit per channel, 48 kHz synchronous (streams with up to 16-channels are received but only the first 8 are output)
• 1 ms or 125 µs packet interval
• SMPTE ST 2022-7 dual-stream input for hitless switching
• 2 x 3G-SDI on BNC (single source, mirrored output)
• Up to 8 channels, SDI embedded audio, 24-bit per channel, 48 kHz synchronous
• L/R RCA analog audio levels at -10 dBu (nominal)
• 1 x BNC reserved for potential future updates
• NMOS Rx discovery and control according to standards IS-04 v1.2 and IS-05 v1.0
• Ember+ control (no discovery, control only)
• AJA REST API control (discovery via SSDP or MDNS)
• Supported over dedicated management Ethernet port and in-band over media ports
• PTP support compliant with PTP PTPv2 / IEEE 1588-2008
• SMPTE ST 2059-1 compliant
• Arista Networks SFP-10G-SR Compatible 10GBASE-SR
• Fiberstore SFP-10GSR-85 10G SFP+ 850nm
• Finisar FTLX1471D3BCL (for single-mode 1310nm)
• Mellanox MFM1T02A-SR 850nm 10G
• Maximum supported SFP+ power is 500 mW per SFP+ cage

In The Box

• 1 x AJA SMPTE ST 2110 IP to SDI Mini-Converter
• 1 x AJA DWP-U-R1 Worldwide Power Supply for AJA Mini-Converters
• 1 x Limited 5-Year Warranty