Magewell USB Capture SDI Plus
Magewell USB Capture SDI Plus
SKU:
320500000
Availability:
Enquire for ETA
The Magewell USB Capture SDI Plus is a one-channel 2K capture device that interfaces with your computer via USB 3.0. It features loop-through BNC input/output that allows you to see your video on a downstream device, while you are capturing it into your computer. It also has a line-in audio input, for capturing audio directly, without picture, or you can de-embed the audio from the SDI stream..
Video Processing. Video processing pipelines with 160MP processing bandwidthVideo croppingVideo scalingVideo de-interlacingWeaveBlend top & bottom fieldTop field onlyBottom field onlyVideo aspect-ratio conversionAuto or manual selection of input aspect ratioAuto or manual selection of capture aspect ratioThree aspect-ratio conversion modes: Ignore (Anamorphic), Cropping, or Padding (Letterbox or Pillarbox)Video color-format conversionAuto or manual selection of input color format & quantization rangeAuto or manual selection of capture color format, quantization range & saturation rangeSupport for RGB, YCbCr 601, YCbCr 709 color formatsSupport for Limited or Full quantization rangeSupport for Limited, Full & 'Extended gamut' saturation rangeVideo frame-rate conversionVertical flip and mirror.
- Capture SD/HD/3G/2K-SDI & Embedded Audio
- Loop-Through SD/HD/3G/2K-SDI
- Line-In Audio Input
- De-Embed Audio from SDI
Magewell USB Capture SDI Plus, One-Channel 2K Capture Device
The Magewell USB Capture SDI Plus is a one-channel 2K capture device that interfaces with your computer via USB 3.0. It features loop-through BNC input/output that allows you to see your video on a downstream device, while you are capturing it into your computer. It also has a line-in audio input, for capturing audio directly, without picture, or you can de-embed the audio from the SDI stream.
Video Processing
- Video processing pipelines with 160MP processing bandwidth
- Video cropping
- Video scaling
- Video de-interlacing
- Weave
- Blend top & bottom field
- Top field only
- Bottom field only
- Video aspect-ratio conversion
- Auto or manual selection of input aspect ratio
- Auto or manual selection of capture aspect ratio
- Three aspect-ratio conversion modes: Ignore (Anamorphic), Cropping, or Padding (Letterbox or Pillarbox)
- Video color-format conversion
- Auto or manual selection of input color format & quantization range
- Auto or manual selection of capture color format, quantization range & saturation range
- Support for RGB, YCbCr 601, YCbCr 709 color formats
- Support for Limited or Full quantization range
- Support for Limited, Full & 'Extended gamut' saturation range
- Video frame-rate conversion
- Vertical flip and mirror
Multiple Devices on One Computer
Support for connecting multiple USB devices to one systemSupport for setting the device serial number as the device name shown in the system using USB Capture Utility
SDK
The USB Capture SDK provide functions including signal status extraction and capture configurationLED Indicator
Status LEDs indicate the working state of each channel:- Pulsing slowly: idle
- On: input signal locked
- Off: input signal unlocked
- Double blinks: memory failed or FPGA configuration failed
| Supported OS | Windows: 7/8/8.1/10/2008/2008 R2/2012 (x86 & x64) Linux: (Ubuntu 12.04-16.10, CentOS 7) OS X: 10.9-10.11 macOS: 10.12 Chrome OS |
| Supported APIs | Windows
|
| Supported Software | VLC VirtualDub OBS XSplit vMix VidBlaster Wirecast Microsoft Media Encoder Adobe Flash Media Encoder Any Other DirectShow, V4L2, QuickTime, AV Foundation Based Encoding, or Streaming Software |
| Input Interface | SD/HD/3G-SDI: 1 x BNC Unbalanced Line-In: 3.5 mm Jack |
| Output Interface | Loop-Through: 1 x BNC Unbalanced Line-Out: 3.5 mm Jack |
| Host Interface | USB 3.0: Compatible with USB 2.0/3.1 |
| Input | Resolution Supports up to 2048 x 1080 SDI Specific Features Integrated Cable Equalizer Supporting Cable Lengths up to 459' / 140 Meters for 3G-SDI Signals Support for SD/HD/3Ga/3Gb/3Ga-DL/3Gb-DS Standards Support for 2K (2048×1080) Mode Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 Color Sampling Support for 10/12-bit Color Depth Support for extraction of SMPTE 352 Payload Identifier Support for up to 2 (Mono) Audio Channels at 48 kHz Support for Extraction of Audio Formation Information & Channel Status Data Limited Support of 3Gb-DS: Only the First Stream Can Be Captured Limited Support for Capture of the First Link of Dual-Link Interfaces: YCbCr 4:2:2 10-Bit 1080p 50/59.94/60: Captured as 1080i 50/59.94/60 YCbCr 4:4:4 10-Bit: Captured as 4:2:2 RGB 4:4:4: R/B Sub-Sampled |
| Analog Audio | Extract the Embedded SDI Audio and Output via 3.5 mm Unbalanced Line Out Capture Analog Audio via 3.5 mm Unbalanced Line-In Interface |
| Video Capture Format | Support for Capture Resolutions up to 2048×1080 Support for Capture Frame Rates up to 120 fps (Actual Capture Frame Rate Can Be Limited by the USB Bandwidth and Internal Working Frequency. Typical Capture Frame Rates on the Intel USB 3.0 Controller are as Follows:) 1920×1080 YUY2 (up to 70 fps) 1920×1080 RGB24 (up to 60 fps) Support for YUY2 & UYVY4:2:2 8-Bit Support for RGB24 & RGB32 4:4:4 8-Bit The Default Capture Format Is YUY2 More Capture Format Can Be Set Using USB Capture Utility |
| Power Consumption | 5 V Max Current: ~0.5 A Max Power Consumption: ~2.5 W |
| Environment | Operating Temperature: 32 to 122°F / 0 to 50°C Storage Temperature: -4 to 158°F / -20 to 70°C Relative Humidity: 5 to 90% Non-Condensing |
| Dimensions | 4.36 x 2.24 x 0.67" / 11.07 x 5.68 x 1.7 cm |
| Package Weight | 0.23Kg |
| Box Dimensions (LxWxH) | 13.46cm x 13.46cm x 2.79cm |
In The Box
- 1 x Magewell USB Capture SDI Plus, One-Channel 2K Capture Device
- 1 x USB 3.0 Cable
- 1 x Limited 3-Year Warranty
0 Reviews Hide Reviews Show Reviews
Related Products
