Equip your Sony VENICE with the Wooden Camera Pro Accessory Kit to set it up for professional cinema and video production. The top plate has many threaded mounting points of the 1/4"-20, 3/8"-16, and ARRI-standard variety. 15mm LWS accessories can be attached by locking separately available 15mm rods into the Solid Baseplate. Audio can be routed in via the conventional XLR connections on the A-Box, which also supports phantom power from the camera. The Master Top Handle can be reconfigured using the included segments to accommodate the VENICE with or without the external R7 recorder. Attach the AIR EVF Extension Arm for greater flexibility for EVF placement. Lastly, the D-Box has a V-mount for a battery, and a slim power distribution bracket that conveniently rests atop the camera.

Wooden Camera Solid Baseplate for Sony VENICE, F55 & F5

Rig up your Sony VENICE, F55, or F5 with this Solid Baseplate from Wooden Camera. Featuring an ARRI-standard rosette on each side, as well as 15mm LWS openings for pass-through rods, this fixed baseplate makes it easy to add accessories such as a lens support, follow focus, or matte box to your setup. There are two rod clamps on each side, so if you prefer you can use two sets of rods, one in the front and one in the back. The Solid Baseplate brings the camera up to the correct lens height when using a separately available ARRI-standard bridge plate such as the 19mm or 15mm Unified Bridgeplate.

Wooden Camera A-Box for VENICE Motion Picture Camera

This A-Box from Wooden Camera adapts the single 5-pin XLR on the side of the body of the Sony VENICE camera, to two standard 3-pin female XLRs. The A-Box can be easily installed and is designed to fit the shape of the camera without blocking the airflow around it. When phantom power is enabled on the camera, the A-Box passes it through to the microphones.

Wooden Camera Air EVF Extension Arm for Sony Venice DVF-EL200 EVF

The Wooden Camera Air EVF Extension Arm for Sony VENICE DVF-EL200 EVF is a lightweight extension arm that mounts on Wooden Camera's AIR EVF Mount and also on the Sony viewfinder mount. The extension is 10.5" long and features 4" of additional extension, which makes it well suited for shooting when your camera is mounted on a tripod.

The extension slides securely into the Wooden Camera Air EVF mount or the original Sony EVF Mount. Then slide your EVF into the end of the extension. A built-in friction knuckle enables adjusting the angle of the EVF without having to loosen and tighten a thumbscrew. The arm also features an eyepiece leveler attachment point compatible with ARRI or other third-party eyepiece leveler rods. There are no tools required to install, operate, or remove the extension arm.

• No tools required
• Compatible with Wooden Camera and Sony EVF mount for Sony VENICE
• Extends from 10.5 to 14.5"
• Enables adjusting the tilt angle of an attached Sony VENICE EVF (not included) without having to loosen or tighten the friction knob to make adjustments

Equip your Sony VENICE with the Wooden Camera Pro Accessory Kit to set it up for professional cinema and video production. The top plate has many threaded mounting points of the 1/4"-20, 3/8"-16, and ARRI-standard variety. 15mm LWS accessories can be attached by locking separately available 15mm rods into the Solid Baseplate. Audio can be routed in via the conventional XLR connections on the A-Box, which also supports phantom power from the camera. The Master Top Handle can be reconfigured using the included segments to accommodate the VENICE with or without the external R7 recorder. Attach the AIR EVF Extension Arm for greater flexibility for EVF placement. Lastly, the D-Box has a V-mount for a battery, and a slim power distribution bracket that conveniently rests atop the camera.

Wooden Camera Solid Baseplate for Sony VENICE, F55 & F5

Rig up your Sony VENICE, F55, or F5 with this Solid Baseplate from Wooden Camera. Featuring an ARRI-standard rosette on each side, as well as 15mm LWS openings for pass-through rods, this fixed baseplate makes it easy to add accessories such as a lens support, follow focus, or matte box to your setup. There are two rod clamps on each side, so if you prefer you can use two sets of rods, one in the front and one in the back. The Solid Baseplate brings the camera up to the correct lens height when using a separately available ARRI-standard bridge plate such as the 19mm or 15mm Unified Bridgeplate.

Wooden Camera A-Box for VENICE Motion Picture Camera

This A-Box from Wooden Camera adapts the single 5-pin XLR on the side of the body of the Sony VENICE camera, to two standard 3-pin female XLRs. The A-Box can be easily installed and is designed to fit the shape of the camera without blocking the airflow around it. When phantom power is enabled on the camera, the A-Box passes it through to the microphones.

Wooden Camera Air EVF Extension Arm for Sony Venice DVF-EL200 EVF

The Wooden Camera Air EVF Extension Arm for Sony VENICE DVF-EL200 EVF is a lightweight extension arm that mounts on Wooden Camera's AIR EVF Mount and also on the Sony viewfinder mount. The extension is 10.5" long and features 4" of additional extension, which makes it well suited for shooting when your camera is mounted on a tripod.

The extension slides securely into the Wooden Camera Air EVF mount or the original Sony EVF Mount. Then slide your EVF into the end of the extension. A built-in friction knuckle enables adjusting the angle of the EVF without having to loosen and tighten a thumbscrew. The arm also features an eyepiece leveler attachment point compatible with ARRI or other third-party eyepiece leveler rods. There are no tools required to install, operate, or remove the extension arm.

• No tools required
• Compatible with Wooden Camera and Sony EVF mount for Sony VENICE
• Extends from 10.5 to 14.5"
• Enables adjusting the tilt angle of an attached Sony VENICE EVF (not included) without having to loosen or tighten the friction knob to make adjustments