Sonnet Transposer 2.5" SSD to 3.5" Drive Tray Adapter
Sonnet Transposer 2.5" SSD to 3.5" Drive Tray Adapter
SKU:
TP-25ST35TA
Availability:
In Stock
Write a Review
Sonnet
Sonnet Transposer 2.5" SSD to 3.5" Drive Tray Adapter
Using the included screws, securely and easily install a 2.5" hard drive or SSD into your system's 3.5" drive bay using the Transposer 2.5" SSD to 3.5" Drive Tray Adapter from Sonnet. Compatible with 2.5" drives that are 7, 9.5, 12.5, and 15mm tall, as well as drives with SATA III 6 Gb/s and SATA II 3 Gb/s interfaces, this drive adapter allows the installed drive to be secured from screw holes either on the sides or on the bottom. Using an open-frame aluminum heatsink design, the Transposer also helps keep your drive cool and ensure it's long-term reliability.
Additionally, no bridge chip is used in making any connections, which helps to minimize any losses in data transfer speeds.Adapts a 2.5" SATA III 6 Gb/s or SATA II 3 Gb/s SSD or hard drive for use in a 3.5" drive trayCan be used anywhere a 3.5" drive is normally used, including computer drive bays and side or bottom mount drive enclosure traysEffectively conducts and convects away heat to help maintain the long-term reliability of high-performance SSDs and hard drivesNo loss in data transfer speeds - no bridge chip used.
- Adapt a 2.5" SSD/HDD to a 3.5" Drive Bay
- Compatible with Drives 7-15mm Tall
- Compatible with SATA III 6 Gb/s Drives
- Compatible with SATA II 3 Gb/s Drives
- Open-Frame Aluminum Heatsink Design
- Conducts and Convects Away Heat
- Helps Ensure Long-Term Reliability
- No Bridge Chip Used
- Bottom or Side-Mounted Screw Holes
- Drive Mounting Screws Included
Sonnet Transposer 2.5" SSD to 3.5" Drive Tray Adapter
Using the included screws, securely and easily install a 2.5" hard drive or SSD into your system's 3.5" drive bay using the Transposer 2.5" SSD to 3.5" Drive Tray Adapter from Sonnet. Compatible with 2.5" drives that are 7, 9.5, 12.5, and 15mm tall, as well as drives with SATA III 6 Gb/s and SATA II 3 Gb/s interfaces, this drive adapter allows the installed drive to be secured from screw holes either on the sides or on the bottom. Using an open-frame aluminum heatsink design, the Transposer also helps keep your drive cool and ensure it's long-term reliability. Additionally, no bridge chip is used in making any connections, which helps to minimize any losses in data transfer speeds.Adapts a 2.5" SATA III 6 Gb/s or SATA II 3 Gb/s SSD or hard drive for use in a 3.5" drive trayCan be used anywhere a 3.5" drive is normally used, including computer drive bays and side or bottom mount drive enclosure traysEffectively conducts and convects away heat to help maintain the long-term reliability of high-performance SSDs and hard drivesNo loss in data transfer speeds - no bridge chip used
| Drive Compatibility | 2.5" SATA SSD and hard disk drives |
| Drive Tray Compatibility | Drive trays compatible with 3.5" drives |
| Dimensions | 4.0 x 5.4 x 0.7" / 101.6 x 137.2 x 17.8 mm |
| Weight | Not specified by manufacturer |
| Package Weight | 0.16Kg |
| Box Dimensions (LxWxH) | 14.99cm x 11.18cm x 1.52cm |
In The Box
- 1 x Sonnet Transposer 2.5" SSD to 3.5" Drive Tray Adapter
- 1 x Drive Mounting Screws
- 1 x Limited 2-Year Warranty
Sonnet Transposer 2.5" SSD to 3.5" Drive Tray Adapter
Using the included screws, securely and easily install a 2.5" hard drive or SSD into your system's 3.5" drive bay using the Transposer 2.5" SSD to 3.5" Drive Tray Adapter from Sonnet. Compatible with 2.5" drives that are 7, 9.5, 12.5, and 15mm tall, as well as drives with SATA III 6 Gb/s and SATA II 3 Gb/s interfaces, this drive adapter allows the installed drive to be secured from screw holes either on the sides or on the bottom. Using an open-frame aluminum heatsink design, the Transposer also helps keep your drive cool and ensure it's long-term reliability. Additionally, no bridge chip is used in making any connections, which helps to minimize any losses in data transfer speeds.Adapts a 2.5" SATA III 6 Gb/s or SATA II 3 Gb/s SSD or hard drive for use in a 3.5" drive trayCan be used anywhere a 3.5" drive is normally used, including computer drive bays and side or bottom mount drive enclosure traysEffectively conducts and convects away heat to help maintain the long-term reliability of high-performance SSDs and hard drivesNo loss in data transfer speeds - no bridge chip used
| Drive Compatibility | 2.5" SATA SSD and hard disk drives |
| Drive Tray Compatibility | Drive trays compatible with 3.5" drives |
| Dimensions | 4.0 x 5.4 x 0.7" / 101.6 x 137.2 x 17.8 mm |
| Weight | Not specified by manufacturer |
| Package Weight | 0.16Kg |
| Box Dimensions (LxWxH) | 14.99cm x 11.18cm x 1.52cm |
In The Box
- 1 x Sonnet Transposer 2.5" SSD to 3.5" Drive Tray Adapter
- 1 x Drive Mounting Screws
- 1 x Limited 2-Year Warranty
0 Reviews Hide Reviews Show Reviews
Related Products
