The OConnor Camera Assistant Bag is designed to securely hold your fluid head and other gear and to be comfortably worn around the back or shoulder or carried by hand. It's a fully waterproof bag...

This OConnor Front End Handle is designed to fit into the front rosette of the 2560 fluid head. This gives the operator the ability to maneuver and position the camera safely, accurately, and...

The Ultimate 2560 Fluid Head from OConnor is capable of supporting camera payloads up to 65 pounds at a 6" center of gravity above the platform, making it well suited for cameras such as the ARRI...

The Ultimate 2560 Fluid Head Package from OConnor is designed for use with the current crop of digital cinema cameras. Weighing less than 18 pounds, 2560 is capable of supporting camera payloads up...

The Floor Spreader for 30L / 60L Tripod from OConnor is a floor spreader designed for use with an OConnor 30L or 60L tripod. The floor spreader is also compatible with all Sachtler 100 and 150 bowl...

The OConnor 60L 2-Stage Carbon Fiber Tripod Legs with 150mm Bowl support tripod heads that have a 150mm leveling ball. The legs feature 2-stages and weigh only 9 pounds; however, they can support 209...

The OConnor 60L 2-Stage Carbon Fiber Tripod Legs with 150mm Bowl support tripod heads that have a 150mm leveling ball. The legs feature 2-stages and weigh only 9 lb, however they can support 209 lb...

The O’Connor Mid-Level Spreader is designed for use with the 30L and 60L tripods. This spreader allows you to set the required angle and footprint of the tripod legs..

The OConnor 30L Two-Stage Carbon Fiber Tripod is designed to work with tripod heads that have a 100mm ball, such as OConnor's 1030D and 1030Ds. The legs weigh just under 9 pounds, yet can support a...

The OConnor Low Hat Mitchell Mount is used as an interface for any Mitchell Base head when you need to configure the head very close to the ground. This mount is constructed from high-strength,...