Miller ArrowX 5 Sprinter II 2-Stage Aluminum Tripod System with Mid-Level Spreader

The Arrow X5 Fluid Head from Miller is suitable for use with ENG and EFP camcorders. It offers a 4.4 to 46.2 lb payload range and seven selectable pan-tilt fluid drag positions. It features precision fluid drag with a 16-position CB Plus counterbalance system. CB Plus is a sequential counterbalance design, features eight larger counterbalance steps, allowing you to quickly and efficiently achieve the required counterbalance position. The system's one flick switch located at the front of the head adds a half step between each of the eight larger steps enabling counterbalance fine-tuning when required. The Arrow X5 fluid head features a 100mm ball leveling with three M5 holes for flat base mounting. The pan and tilt locks utilize caliper disc brakes for reliable, short-throw fixing.The Miller Sprinter II 2-Stage Alloy Tripod is a quick-setup solution for a tripod head with 100mm ball base. Its light weight, flip-locks, and rigid construction allow for durability without compromising usability in ENG, EFP, and other pro video applications. Unlike many traditional multi-stage designs, both flip-locks are located on the same section for easy reaching, no matter the height setting. The fast setup is complemented by an in-line carry handle, for portability on set or in the field. Compatible spreaders, rubber feet, and dollys are available separately.The Miller 993 is a mid-level spreader for Sprinter, Arrow 25/40 and HD tripod systems. This device offers variable adjustment in minimum and maximum height settings and a latch and swivel design.The Miller 872 Soft Tripod Case is a padded tripod carry case designed for the Miller Arrow 2 stage tripod systems. It has rigid sidewalls sandwiched between high density foam padding and a head-end cradle to protect the tripod and fluid head from heavy bumps during flight and vehicle transport. It has a weatherproof Cordura construction with heavy duty zippers on the bag, 2 interior pockets and 1 large outside pocket. The case is carried by either the padded interlocking carry straps or the padded shoulder strap.The 475 Tripod Feet from Miller are a set of three rubber snap-on feet designed to be used in any situation where the integrated dual spiked feet are not optimal. They are ideal for use on both slippery and glossy floors. These rubber feet are compatible with all tripods with a 993 mid level spreader.Compact, lightweight, and versatile7-step plus zero pan and tilt drag16-position CB Plus counterbalance systemWide payload range of 4.4 to 46.2 lbFluid drag system with smooth start and soft stop technology and balanced diagonal transitionsControls all-in-one-location design for fast, easy and practical useIlluminated bubble level and pan-tilt drag controlsPrecise floating pan-tilt caliper locks ensure bounce free on-off performanceQuick-release, 120mm sliding camera platform with Euro-style camera plateRemovable 100mm ball leveling with three 3/8" holes for flat base mountingMitchell base adaptableRobust construction for rugged outdoor shooting conditionsOptional second pan handle mountSide mounting points for viewfinders and accessories

Key Features

• Supplied with black handle carrier
• Durable black anodized aluminum tubing
• Material alloy/rubber

Compatible with;

• Arrow 2 stage system tripod

In The Box

• 1 x Miller Arrow X5 Fluid Head
• 1 x Miller Sprinter II 2-Stage Alloy Tripod (Mid-Level Spreader Ready)
• 1 x Miller 993 Mid-level Spreader
• 1 x Miller Telescopic Pan Handle with Carrier (Black)
• 1 x Miller 872 Arrow Soft Case - for 2-Stage Tripod Systems (Except Systems with HD Tripod)
• 1 x Miller 475 Rubber Feet Pads for Select Tripods (Set of 3)

Miller ArrowX 5 Sprinter II 2-Stage Aluminum Tripod System with Mid-Level Spreader

The Arrow X5 Fluid Head from Miller is suitable for use with ENG and EFP camcorders. It offers a 4.4 to 46.2 lb payload range and seven selectable pan-tilt fluid drag positions. It features precision fluid drag with a 16-position CB Plus counterbalance system. CB Plus is a sequential counterbalance design, features eight larger counterbalance steps, allowing you to quickly and efficiently achieve the required counterbalance position. The system's one flick switch located at the front of the head adds a half step between each of the eight larger steps enabling counterbalance fine-tuning when required. The Arrow X5 fluid head features a 100mm ball leveling with three M5 holes for flat base mounting. The pan and tilt locks utilize caliper disc brakes for reliable, short-throw fixing.The Miller Sprinter II 2-Stage Alloy Tripod is a quick-setup solution for a tripod head with 100mm ball base. Its light weight, flip-locks, and rigid construction allow for durability without compromising usability in ENG, EFP, and other pro video applications. Unlike many traditional multi-stage designs, both flip-locks are located on the same section for easy reaching, no matter the height setting. The fast setup is complemented by an in-line carry handle, for portability on set or in the field. Compatible spreaders, rubber feet, and dollys are available separately.The Miller 993 is a mid-level spreader for Sprinter, Arrow 25/40 and HD tripod systems. This device offers variable adjustment in minimum and maximum height settings and a latch and swivel design.The Miller 872 Soft Tripod Case is a padded tripod carry case designed for the Miller Arrow 2 stage tripod systems. It has rigid sidewalls sandwiched between high density foam padding and a head-end cradle to protect the tripod and fluid head from heavy bumps during flight and vehicle transport. It has a weatherproof Cordura construction with heavy duty zippers on the bag, 2 interior pockets and 1 large outside pocket. The case is carried by either the padded interlocking carry straps or the padded shoulder strap.The 475 Tripod Feet from Miller are a set of three rubber snap-on feet designed to be used in any situation where the integrated dual spiked feet are not optimal. They are ideal for use on both slippery and glossy floors. These rubber feet are compatible with all tripods with a 993 mid level spreader.Compact, lightweight, and versatile7-step plus zero pan and tilt drag16-position CB Plus counterbalance systemWide payload range of 4.4 to 46.2 lbFluid drag system with smooth start and soft stop technology and balanced diagonal transitionsControls all-in-one-location design for fast, easy and practical useIlluminated bubble level and pan-tilt drag controlsPrecise floating pan-tilt caliper locks ensure bounce free on-off performanceQuick-release, 120mm sliding camera platform with Euro-style camera plateRemovable 100mm ball leveling with three 3/8" holes for flat base mountingMitchell base adaptableRobust construction for rugged outdoor shooting conditionsOptional second pan handle mountSide mounting points for viewfinders and accessories

Key Features

• Supplied with black handle carrier
• Durable black anodized aluminum tubing
• Material alloy/rubber

Compatible with;

• Arrow 2 stage system tripod

In The Box

• 1 x Miller Arrow X5 Fluid Head
• 1 x Miller Sprinter II 2-Stage Alloy Tripod (Mid-Level Spreader Ready)
• 1 x Miller 993 Mid-level Spreader
• 1 x Miller Telescopic Pan Handle with Carrier (Black)
• 1 x Miller 872 Arrow Soft Case - for 2-Stage Tripod Systems (Except Systems with HD Tripod)
• 1 x Miller 475 Rubber Feet Pads for Select Tripods (Set of 3)