Miller ArrowX 5 Sprinter II 1-Stage Aluminum Tripod System with Ground Spreader

The Arrow X5 Fluid Head from Miller is suitable for use with ENG and EFP camcorders. It offers a 4.4 to 46.2 lb payload range and seven selectable pan-tilt fluid drag positions. It features precision fluid drag with a 16-position CB Plus counterbalance system. CB Plus is a sequential counterbalance design, features eight larger counterbalance steps, allowing you to quickly and efficiently achieve the required counterbalance position. The system's one flick switch located at the front of the head adds a half step between each of the eight larger steps enabling counterbalance fine-tuning when required. The Arrow X5 fluid head features a 100mm ball leveling with three M5 holes for flat base mounting. The pan and tilt locks utilize caliper disc brakes for reliable, short-throw fixing.A On-Ground Spreader is chosen when shooting is performed on a level surface, such as studio, city streets, offices, sport fields and stadiums. It allows for rapid set-up and pull down by keeping tripod legs at an equal or preset distance relative to each other. Attaches directly to the feet at the bottom of a tripod and its arms are telescopic to allow extension of a tripod leg without detaching the spreader.The Miller 870 Soft Tripod Case is a padded tripod carry case designed for the Miller Arrow single stage tripod systems. It has rigid sidewalls sandwiched between high density foam padding and a head-end cradle to protect the tripod and fluid head from heavy bumps during flight and vehicle transport. It has a weatherproof Cordura construction with heavy duty zippers on the bag and the 2 interior pockets. The case is carried by either the padded interlocking carry straps or the padded shoulder strap.Compact, lightweight, and versatile7-step plus zero pan and tilt drag16-position CB Plus counterbalance systemWide payload range of 4.4 to 46.2 lbFluid drag system with smooth start and soft stop technology and balanced diagonal transitionsControls all-in-one-location design for fast, easy and practical useIlluminated bubble level and pan-tilt drag controlsPrecise floating pan-tilt caliper locks ensure bounce free on-off performanceQuick-release, 120mm sliding camera platform with Euro-style camera plateRemovable 100mm ball leveling with three 3/8" holes for flat base mountingMitchell base adaptableRobust construction for rugged outdoor shooting conditionsOptional second pan handle mountSide mounting points for viewfinders and accessoriesSuits all SPRINTER Single Stage and 2-Stage tripods Telescopic arm extensions Integrated swivel foot pads

Key Features

• Supplied with black handle carrier
• Durable black anodized aluminum tubing
• Material alloy/rubber

Compatible with;

• Miller Arrow single stage system tripods

In The Box

• 1 x Miller Arrow X5 Fluid Head
• 1 x Miller 470 On-Ground Tripod Spreader - for Sprinter Tripods
• 1 x Miller Telescopic Pan Handle with Carrier (Black)
• 1 x Miller 870 Arrow Soft Case - for 1-Stage Tripod Systems (Except Systems with HD Tripod)
• 1 x 1589G Sprinter II Single-Stage Aluminum Tripod

Miller ArrowX 5 Sprinter II 1-Stage Aluminum Tripod System with Ground Spreader

The Arrow X5 Fluid Head from Miller is suitable for use with ENG and EFP camcorders. It offers a 4.4 to 46.2 lb payload range and seven selectable pan-tilt fluid drag positions. It features precision fluid drag with a 16-position CB Plus counterbalance system. CB Plus is a sequential counterbalance design, features eight larger counterbalance steps, allowing you to quickly and efficiently achieve the required counterbalance position. The system's one flick switch located at the front of the head adds a half step between each of the eight larger steps enabling counterbalance fine-tuning when required. The Arrow X5 fluid head features a 100mm ball leveling with three M5 holes for flat base mounting. The pan and tilt locks utilize caliper disc brakes for reliable, short-throw fixing.A On-Ground Spreader is chosen when shooting is performed on a level surface, such as studio, city streets, offices, sport fields and stadiums. It allows for rapid set-up and pull down by keeping tripod legs at an equal or preset distance relative to each other. Attaches directly to the feet at the bottom of a tripod and its arms are telescopic to allow extension of a tripod leg without detaching the spreader.The Miller 870 Soft Tripod Case is a padded tripod carry case designed for the Miller Arrow single stage tripod systems. It has rigid sidewalls sandwiched between high density foam padding and a head-end cradle to protect the tripod and fluid head from heavy bumps during flight and vehicle transport. It has a weatherproof Cordura construction with heavy duty zippers on the bag and the 2 interior pockets. The case is carried by either the padded interlocking carry straps or the padded shoulder strap.Compact, lightweight, and versatile7-step plus zero pan and tilt drag16-position CB Plus counterbalance systemWide payload range of 4.4 to 46.2 lbFluid drag system with smooth start and soft stop technology and balanced diagonal transitionsControls all-in-one-location design for fast, easy and practical useIlluminated bubble level and pan-tilt drag controlsPrecise floating pan-tilt caliper locks ensure bounce free on-off performanceQuick-release, 120mm sliding camera platform with Euro-style camera plateRemovable 100mm ball leveling with three 3/8" holes for flat base mountingMitchell base adaptableRobust construction for rugged outdoor shooting conditionsOptional second pan handle mountSide mounting points for viewfinders and accessoriesSuits all SPRINTER Single Stage and 2-Stage tripods Telescopic arm extensions Integrated swivel foot pads

Key Features

• Supplied with black handle carrier
• Durable black anodized aluminum tubing
• Material alloy/rubber

Compatible with;

• Miller Arrow single stage system tripods

In The Box

• 1 x Miller Arrow X5 Fluid Head
• 1 x Miller 470 On-Ground Tripod Spreader - for Sprinter Tripods
• 1 x Miller Telescopic Pan Handle with Carrier (Black)
• 1 x Miller 870 Arrow Soft Case - for 1-Stage Tripod Systems (Except Systems with HD Tripod)
• 1 x 1589G Sprinter II Single-Stage Aluminum Tripod