Dotworkz 12V Outdoor Power Pack and Pole-Mount Kit for Select COOLDOME Camera Enclosures
Dotworkz 12V Outdoor Power Pack and Pole-Mount Kit for Select COOLDOME Camera Enclosures
The 12V Outdoor Power Pack and Pole-Mount Kit from Dotworkz is designed to power D2 COOLDOME, D3 Single Cooler COOLDOME, and S-Type COOLDOME camera enclosures. The kit attaches to the back of an enclosure and can be then mounted onto a structural post or pole utilizing its three band straps.AC input auto rangeIP67-rated power supplyBuilt-in active PFC functionProtections: Short circuit / overload / over voltageOver temperature protectionShut down O/P voltage, repower after coolingFixed switching frequency at 60 kHz100% full load burn-in test.
- AC Input Auto Range
- IP67-Rated Power Supply
- Built-In Active PFC Function
- Mounts onto Any Pole
Dotworkz 12V Outdoor Power Pack and Pole-Mount Kit for Select COOLDOME Camera Enclosures
The 12V Outdoor Power Pack and Pole-Mount Kit from Dotworkz is designed to power D2 COOLDOME, D3 Single Cooler COOLDOME, and S-Type COOLDOME camera enclosures. The kit attaches to the back of an enclosure and can be then mounted onto a structural post or pole utilizing its three band straps.AC input auto rangeIP67-rated power supplyBuilt-in active PFC functionProtections: Short circuit / overload / over voltageOver temperature protectionShut down O/P voltage, repower after coolingFixed switching frequency at 60 kHz100% full load burn-in test
Compatibility | D2 COOLDOME, D3 Single Cooler COOLDOME, and S-type COOLDOME camera enclosures |
Power | 12 V |
Frequency | 60 kHz |
Rating | IP67-rated power supply |
Protection | Temperature Protection: 105°C at ±5°C (TSW1) |
In The Box
- 1 x Dotworkz 12V Outdoor Power Pack and Pole-Mount Kit for Select COOLDOME Camera Enclosures
- 1 x Limited 1-Year Warranty
Dotworkz 12V Outdoor Power Pack and Pole-Mount Kit for Select COOLDOME Camera Enclosures
The 12V Outdoor Power Pack and Pole-Mount Kit from Dotworkz is designed to power D2 COOLDOME, D3 Single Cooler COOLDOME, and S-Type COOLDOME camera enclosures. The kit attaches to the back of an enclosure and can be then mounted onto a structural post or pole utilizing its three band straps.AC input auto rangeIP67-rated power supplyBuilt-in active PFC functionProtections: Short circuit / overload / over voltageOver temperature protectionShut down O/P voltage, repower after coolingFixed switching frequency at 60 kHz100% full load burn-in test
Compatibility | D2 COOLDOME, D3 Single Cooler COOLDOME, and S-type COOLDOME camera enclosures |
Power | 12 V |
Frequency | 60 kHz |
Rating | IP67-rated power supply |
Protection | Temperature Protection: 105°C at ±5°C (TSW1) |
In The Box
- 1 x Dotworkz 12V Outdoor Power Pack and Pole-Mount Kit for Select COOLDOME Camera Enclosures
- 1 x Limited 1-Year Warranty