Core SWX Fleet Micro 3A Digital Quad Charger for V-Mount Batteries
Core SWX Fleet Micro 3A Digital Quad Charger for V-Mount Batteries
Featuring four independent charge bays, the Core SWX Fleet Micro 3A Digital Quad Charger for V-Mount Batteries is capable of simultaneously charging four batteries at 3A each. This means that four 98Wh batteries can be charged in under 2.5 hours. The on-board LCD display screen allows you to easily monitor your battery's smart battery data without needing to connect to a computer.
The micro-USB connector allows for firmware updates and for connection to a computer. The built-in Battery Management Test mode allows the charger to determine battery health and recharge performance.
- Four Position V-Mount Charger
- Charge Current: 3A
- Simultaneously Charge Four Batteries
- 4 x 98Wh Packs Charge in Under 2.5 Hours
- On-Board LCD Display Screen
- Battery Management Test Mode
- SafeFly Charge/Discharge Mode
- Worldwide Compatible 90-240 VAC Input
- 4-Pin XLR Powered DC Output
Core SWX Fleet Micro 3A Digital Quad Charger for V-Mount Batteries
Featuring four independent charge bays, the Core SWX Fleet Micro 3A Digital Quad Charger for V-Mount Batteries is capable of simultaneously charging four batteries at 3A each. This means that four 98Wh batteries can be charged in under 2.5 hours. The on-board LCD display screen allows you to easily monitor your battery's smart battery data without needing to connect to a computer. The micro-USB connector allows for firmware updates and for connection to a computer.
The built-in Battery Management Test mode allows the charger to determine battery health and recharge performance. Activating the SafeFly mode forces the charger to discharge or charge connected batteries to a 30% charge level to meet air travel and shipping requirements. While plugged into an AC power source the Fleet Micro 3A Quad Charger can either charge batteries or be used as a camera power supply via the built-in 4-pin XLR. In the absence of AC power, you can use the charger to feed the 4-pin XLR from connected batteries providing unregulated power. The housing is made of aluminum, providing for a robust build.
Key Features
- Four independent V-mount charge bays
- Simultaneous charging
- Approximately 2.5-hour charge time for four 98Wh batteries
- 90-240 VAC worldwide compatible input voltage
- Compatible with batteries from RED, Anton Bauer, and others in addition to CoreSWX
- The four-line LCD display screen enables monitoring battery information from the charger
- Hypercine mode allows you to mount up to four batteries to provide unregulated 12 to 16.8 VDC from the charger's 4-pin XLR, without connecting to an AC power supply
- In Hypercine mode the charger's LCD reports back available capacity as well as remaining runtime
- Aluminum build
- Weighs 5 pounds
Mount / Series Type | V-Mount |
Number of Battery Bays | 4 |
AC Input Power | 90 to 240 VAC, 50 / 60 Hz |
Output Voltage | 12 to VDC |
Multi-Bay Charging Modes | Simultaneous |
Chemistry | Lithium-Ion |
Maximum Wattage | 90 W |
Dimensions | 9.1 x 3.35 x 12.17" / 23.11 x 8.51 x 30.91 cm |
Weight | 5 lb / 2.3 kg |
Warranty Length | Limited 3-Year Warranty |
Package Weight | 3.32Kg |
Box Dimensions (LxWxH) | 43.31cm x 31.62cm x 11.18cm |
In The Box
- 1 x Core SWX Fleet Micro 3A Digital Quad Charger for V-Mount Batteries
- 1 x 4' AC Power Cable
- 1 x Limited 3-Year Warranty
Core SWX Fleet Micro 3A Digital Quad Charger for V-Mount Batteries
Featuring four independent charge bays, the Core SWX Fleet Micro 3A Digital Quad Charger for V-Mount Batteries is capable of simultaneously charging four batteries at 3A each. This means that four 98Wh batteries can be charged in under 2.5 hours. The on-board LCD display screen allows you to easily monitor your battery's smart battery data without needing to connect to a computer. The micro-USB connector allows for firmware updates and for connection to a computer.
The built-in Battery Management Test mode allows the charger to determine battery health and recharge performance. Activating the SafeFly mode forces the charger to discharge or charge connected batteries to a 30% charge level to meet air travel and shipping requirements. While plugged into an AC power source the Fleet Micro 3A Quad Charger can either charge batteries or be used as a camera power supply via the built-in 4-pin XLR. In the absence of AC power, you can use the charger to feed the 4-pin XLR from connected batteries providing unregulated power. The housing is made of aluminum, providing for a robust build.
Key Features
- Four independent V-mount charge bays
- Simultaneous charging
- Approximately 2.5-hour charge time for four 98Wh batteries
- 90-240 VAC worldwide compatible input voltage
- Compatible with batteries from RED, Anton Bauer, and others in addition to CoreSWX
- The four-line LCD display screen enables monitoring battery information from the charger
- Hypercine mode allows you to mount up to four batteries to provide unregulated 12 to 16.8 VDC from the charger's 4-pin XLR, without connecting to an AC power supply
- In Hypercine mode the charger's LCD reports back available capacity as well as remaining runtime
- Aluminum build
- Weighs 5 pounds
Mount / Series Type | V-Mount |
Number of Battery Bays | 4 |
AC Input Power | 90 to 240 VAC, 50 / 60 Hz |
Output Voltage | 12 to VDC |
Multi-Bay Charging Modes | Simultaneous |
Chemistry | Lithium-Ion |
Maximum Wattage | 90 W |
Dimensions | 9.1 x 3.35 x 12.17" / 23.11 x 8.51 x 30.91 cm |
Weight | 5 lb / 2.3 kg |
Warranty Length | Limited 3-Year Warranty |
Package Weight | 3.32Kg |
Box Dimensions (LxWxH) | 43.31cm x 31.62cm x 11.18cm |
In The Box
- 1 x Core SWX Fleet Micro 3A Digital Quad Charger for V-Mount Batteries
- 1 x 4' AC Power Cable
- 1 x Limited 3-Year Warranty