Wooden Camera Unified Accessory Kit for Blackmagic URSA 226400

Description
Specifications
0 Reviews

The Wooden Camera Unified Accessory Kit for Blackmagic URSA Mini/Mini Pro (Advanced) includes the Top Plate (URSA Mini), Unified Baseplate, NATO 70mm Handle Kit (Plus), two 12" 15mm Rods, and the 8" Safety Dovetail.The Top Plate is a top-mounting cheese plate for the Blackmagic URSA Mini camera. It attaches to the camera's top by four 1/4"-20 screws, featuring arrays of 1/4"-20 threaded mounts in standard 9mm spacing, and multiple 3/8"-16 mounts for larger accessories. It includes a tape hook for accurate focus measuring. The Unified Baseplate is designed for use with the URSA Mini and Mini Pro cameras.

It is a quick release baseplate that provides lightweight 15mm rod support at the correct lens height. 15mm rods pass through from front to back and have two locking thumbscrews per side.

The Top Plate is a top-mounting cheese plate for the Blackmagic URSA Mini camera. It attaches to the camera's top by four 1/4"-20 screws, featuring arrays of 1/4"-20 threaded mounts in standard 9mm spacing, and multiple 3/8"-16 mounts for larger accessories. It includes a tape hook for accurate focus measuring.

The Unified Baseplate is designed for use with the URSA Mini and Mini Pro cameras. It is a quick release baseplate that provides lightweight 15mm rod support at the correct lens height. 15mm rods pass through from front to back and have two locking thumbscrews per side. The baseplate releases quickly in two ways, giving the user the option to either take the 15mm lightweight rods or leave them behind.

The NATO Handle Kit consists of a quick release top handle and a 2.8" NATO rail. It offers a variety of mounting points for attaching viewfinders, focus motors, lights, shockmounts, and other accessories. The handle features a sideways 15mm rod port, 15mm rod opening in front, a 19mm rod opening in the rear, shoe mount, and 1/4"-20 and 3/8"-16 mounting threads all around.

The two 12" 15mm Single Support Rods are used for mounting accessories including follow focus systems, matte boxes, lens supports, and servo motors.

The 8" Safety Dovetail Plate is an ARRI standard dovetail with a stopper screw on one end and a safety latch on the other to prevent accidental camera detachment.

Wooden Camera Top-Mounted Cheese Plate for Blackmagic URSA Mini/Mini Pro/12k

The Top-Mounted Cheese Plate for Blackmagic URSA Mini/Mini Pro/12k from Wooden Camera attaches to the camera top by the included 1/4"-20 screws. It is festooned with 1/4"-20 holes with standard 9mm spacing and multiple 3/8"-16 holes for mounting large accessories without stressing your camera's body. Multiple ARRI accessory mounts (3/8"-16 threaded hole with locating divots) are also machined into the top and side of the plate. The plate includes a tape hook for accurate focus measuring. The original Blackmagic handle can be reinstalled on the Top Plate, using the center 1/4" holes.

Wooden Camera Unified Baseplate for URSA Mini, F55, F5

The Wooden Camera Unified Baseplate supports 15mm LWS rods at the correct lens height, and it offers a vertical 15mm rod port for incorporating the optional Unified Lens Adapter Kit. This Kit allows you to support different lens adapters from Wooden Camera, Metabones, and other brands.

The Baseplate includes the Core Unit, a Lower Quick Dovetail tripod plate on the bottom, and a Dovetail Camera Plate for the Blackmagic URSA Mini and Sony F55/F5. Other Unified Baseplate Dovetail Plates are also supported, allowing for quick swaps with a variety of cameras.

The Baseplate provides two quick release options. You can remove the Dovetail Camera Plate only and leave the Core Unit with your rod pair behind, or you can remove the Core Unit from the Lower Quick Dovetail, in which case you'll have a dovetail on the bottom of the Core Unit that's compatible with any 2060 Dovetail, Safety Dovetail, or Shoulder Rig.

The Dovetail Camera Plate features a long slot along its center that lets you secure it to the camera with multiple screws (included), which can be set up to 2.8" (70mm) apart. It also has a non-slip rubber surface that will prevent the camera from twisting.

The Dovetail Camera Plate has an ARCA Swiss standard dovetail compatible with many third-party products. It also has threaded 1/4"-20 threaded holes on the bottom for attaching to gimbals or other compatible tripod plates. The Lower Quick Dovetail has 1/4"-20 and 3/8"-16 threaded holes for attaching to tripod plates or ARRI standard bridgeplates, such as the Wooden Camera Unified Bridgeplates.

The Unified Baseplate can also be upgraded for VCT-14 compatible mounting options. Simply attach it to the optional Unified VCT Wedge Plate, which can then be mounted on the Unified VCT-14 Tripod Plate, also sold separately. The Unified Baseplate is backward compatible with Wooden Camera's original Quick Dovetails (Standard, DSLR, and Large).

Supports 15mm LWS rods at the correct lens height
Offers a vertical 15mm rod port for incorporating the optional Unified Lens Adapter Kit (for lens adapter support)
Includes the Core Unit, Lower Quick Dovetail tripod plate, and Dovetail Camera Plate
Two quick release options—remove Core Unit or remove Dovetail Camera Plate
Core Unit features a dovetail on the bottom, compatible with any 2060 Dovetail, Safety Dovetail, or Shoulder Rig
Dovetail Camera Plate features an ARCA Swiss standard dovetail and threaded holes for attaching to gimbals or other compatible tripods plates
Lower Quick Dovetail offers threaded holes for attaching to tripod plates or ARRI standard bridgeplates
Long slot along the center allows multiple screws to be attached to the camera, set up to 2.8" (70mm) apart
Anti-twist, non-slip rubber surface
Upgradable for VCT-14 compatible mounting options
Additional Lower Quick Dovetail and Dovetail Camera Plates can be purchased for quick swap capability
Backward compatible with original Wooden Camera Quick Dovetail

Wooden Camera NATO Handle Kit (Plus, 70mm Rail)

This Wooden Camera NATO Handle Kit, consisting of a quick release top handle and 2.8" / 70mm NATO rail, offers a variety of mounting points for attaching viewfinders, focus motors, lights, shock mounts, and other accessories.

The handle features a sideways 15mm rod port, 15mm rod opening in front, 19mm rod opening in the rear, shoe mount, and 1/4"-20 and 3/8"-16 mounting threads all around. The sideways 15mm rod port is ideal for attaching Wooden Camera's UVF Mount or other viewfinder mounts. Two 1/4"-20 socket screws are included for binding rods in the front and rear rod openings.

The NATO rail can be attached to any two 1/4"-20 threads positioned up to 42mm apart, such as on a cage or select cameras. The handle conveniently slides on and off and secures in place by a lever. A rotating knob on top allows the handle to be adjusted sideways or reversed to the rear by a rosette-like mechanism.

The handle features an integrated NATO rail clamp that lets you slide onto any NATO compatible rail, not just the included one.
The handle position can be adjusted by loosening the top screw, rotating it into the desired position, and then re-tightening the top screw. This gives you a level of versatility you typically don't find in top handles.
The side rod opening lets you attach a 15mm rod perpendicular to your camera, great for attaching an optional monitor/EVF support bracket such as Wooden Camera's UVF Mount v2. A thumbscrew secures the rod in place.
A forward facing 15mm rod opening and 19mm rear rod opening are available for attaching optional single rods, which can be used for mounting accessories such as focus motors. A pair of 1/4"-20 set screws are included to secure the rods in place via the threaded holes along the sides of the grip area.
A cold shoe built into the top of the handle lets you add on-camera lights, microphone shock mounts, or other shoe mount accessories.
1/4"-20 and 3/8"-16 threaded holes along the grip area of the handle are provided for attaching additional accessories.
Two 1/4"-20 thread holes on the front of the handle let you attach an optional 15mm or 19mm rod clamp to the base of the handle.

Wooden Camera Safety Dovetail Plate (8")

The 8" Safety Dovetail Plate from Wooden Camera is an ARRI standard dovetail with a stopper screw on one end and a safety latch on the other to prevent accidental camera detachment. It features threaded 1/4-20 and 3/8-16 holes for accessory mounting and tripod attachment. The dovetail can be attached to a shoulder pad for custom handheld configurations.

Compatibility	Backmagic Design URSA Mini / Mini Pro / 12K
Mounting	Top: Multiple x 1/4"-20 Female Top: 5 x 3/8"-16 Female Top: 14 x ARRI Accessory Mount Front: 7 x 1/4"-20 Female Side: 12 x 1/4"-20 Female Side: 4 x ARRI Accessory Mount
Dimensions	6 x 5 x 0.5" / 152.4 x 127 x 12.7 mm
Weight	6.4 oz / 181.4 g
Package Weight	0.22Kg
Box Dimensions (LxWxH)	17.14cm x 12.83cm x 2.03cm
Support Type	Baseplate
Grip Type	None
Camera Compatibility	Canon EOS C200, Canon EOS C200B, Canon EOS C700
Rod Standard	15 mm LWS / 60 mm Spacing
Accessory Mounting	Sides: Multiple x 1/4"-20 Thread, Multiple x 3/8"-16 Thread Base: 4 x 1/4"-20 Thread, 6 x 3/8"-16 Thread
Camera Mounting	1/4"-20 Screw, 3/8"-16 Screw
Tripod Mounting	1/4"-20 Thread, 3/8"-16 Thread
Rod Ports	2 x 15 mm Rod Port
Shoe Mounting	None
Rosettes	None
Dimensions	6 x 6 x 2" / 15 x 15 x 5 cm
Weight	1.1 lb / 0.5 kg
Package Weight	0.85 lb
Box Dimensions (LxWxH)	5.4 x 5.3 x 1.75"
NATO Rail Length	2.8" / 70 mm
Rail Mounting Distance	Up to 1.7" / 42 mm apart
Package Weight	0.82 lb
Box Dimensions (LxWxH)	7.75 x 4.3 x 2.25"
Dimensions	8.0 x 2.7 x 0.5" / 20.3 x 6.8 x 1.3 cm
Weight	0.6 lb / 0.3 kg
Package Weight	0.635 lb
Box Dimensions (LxWxH)	9 x 2.8 x 0.65"

In The Box

1 x Wooden Camera Top-Mounted Cheese Plate for Blackmagic URSA Mini/Mini Pro/12k
1 x Wooden Camera Unified Baseplate for URSA Mini, F55, F5
1 x Wooden Camera NATO Handle Kit (Plus, 70mm Rail)
1 x Wooden Camera Safety Dovetail Plate (8")
2 x 15mm Support Rod (12")

Write a Review