Protect and add accessory mounting to your DSMC2 camera with the RED DSMC2 Accessory Kit from Wooden Camera. This kit provides a 15mm rod system and multiple threads for attaching pro camera accessories and includes a RED monitor pogo interface and a trigger handle. Kit components include the Easy Rider Baseplate, a Pass-Through Top Plate, a Top Trigger Handle, a 15mm LWS rod bracket, and two 6" rods.

Wooden Camera Pass-Through Top Plate for RED DSMC2 Cameras

The Wooden Camera Pass-Through Top Plate for RED DSMC2 Cameras attaches to the top of your DSMC2 camera using four captive screws and provides additional accessory mounting points. The plate also incorporates the 26-pin LCD and 3-pin trigger connections, passing the signals through to the camera connections. This allows you to mount your RED LCD monitor and Trigger Grip as you would on your camera without the plate while providing multiple threaded accessory mounting points.

The plate incorporates 61 threaded 1/4"-20 mounting holes along the edges and top, as well as two 3/8"-16 threaded holes and 4 x 3/8"-16 threaded mounting holes with ARRI Anti-Twist divots. An additional two 3/8"-16 threaded mounting holes are reserved for use by the LCD connector. The Top Plate is vented, allowing air from your camera's top fans to pass without obstruction.

Wooden Camera Easy Riser Plate for Select RED Cameras

The Easy Riser Plate for Select RED Cameras from Wooden Camera is a riser shim plate designed to work with the RED Weapon, Scarlet Weapon, Raven, and any other DSMC2 camera. It may be used alongside the 19mm Bridgeplate, 15mm Studio, or other RED style bridge plates to achieve correct lens height studio rods. It may also be combined with the LW 15mm Bracket (Weapon/Scarlet-W/Raven) for lightweight rods at correct lens height.

It is important to note that this riser is also compatible with our original LW 15mm Bracket for the RED Epic/Scarlet.

Wooden Camera 15mm Dual-Rod Bracket for RED DSMC2 Cameras

Combine this 15mm Dual-Rod Bracket from Wooden Camera with the separately available RED Easy Riser and equip lightweight 15mm rods at the correct lens height for RED DSMC2 BRAINS like the MONSTRO, HELIUM, GEMINI, WEAPON, EPIC WEAPON, SCARLET WEAPON, RAVEN, and other DSMC2 cameras.

Wooden Camera 15mm Support Rod (3")

This is a single, 3" long 15mm Support Rod from Wooden Camera for mounting accessories. It is chamfered at each end to ease sliding accessories on and off, and has a hollow interior providing for maximum strength.

Protect and add accessory mounting to your DSMC2 camera with the RED DSMC2 Accessory Kit from Wooden Camera. This kit provides a 15mm rod system and multiple threads for attaching pro camera accessories and includes a RED monitor pogo interface and a trigger handle. Kit components include the Easy Rider Baseplate, a Pass-Through Top Plate, a Top Trigger Handle, a 15mm LWS rod bracket, and two 6" rods.

Wooden Camera Pass-Through Top Plate for RED DSMC2 Cameras

The Wooden Camera Pass-Through Top Plate for RED DSMC2 Cameras attaches to the top of your DSMC2 camera using four captive screws and provides additional accessory mounting points. The plate also incorporates the 26-pin LCD and 3-pin trigger connections, passing the signals through to the camera connections. This allows you to mount your RED LCD monitor and Trigger Grip as you would on your camera without the plate while providing multiple threaded accessory mounting points.

The plate incorporates 61 threaded 1/4"-20 mounting holes along the edges and top, as well as two 3/8"-16 threaded holes and 4 x 3/8"-16 threaded mounting holes with ARRI Anti-Twist divots. An additional two 3/8"-16 threaded mounting holes are reserved for use by the LCD connector. The Top Plate is vented, allowing air from your camera's top fans to pass without obstruction.

Wooden Camera Easy Riser Plate for Select RED Cameras

The Easy Riser Plate for Select RED Cameras from Wooden Camera is a riser shim plate designed to work with the RED Weapon, Scarlet Weapon, Raven, and any other DSMC2 camera. It may be used alongside the 19mm Bridgeplate, 15mm Studio, or other RED style bridge plates to achieve correct lens height studio rods. It may also be combined with the LW 15mm Bracket (Weapon/Scarlet-W/Raven) for lightweight rods at correct lens height.

It is important to note that this riser is also compatible with our original LW 15mm Bracket for the RED Epic/Scarlet.

Wooden Camera 15mm Dual-Rod Bracket for RED DSMC2 Cameras

Combine this 15mm Dual-Rod Bracket from Wooden Camera with the separately available RED Easy Riser and equip lightweight 15mm rods at the correct lens height for RED DSMC2 BRAINS like the MONSTRO, HELIUM, GEMINI, WEAPON, EPIC WEAPON, SCARLET WEAPON, RAVEN, and other DSMC2 cameras.

Wooden Camera 15mm Support Rod (3")

This is a single, 3" long 15mm Support Rod from Wooden Camera for mounting accessories. It is chamfered at each end to ease sliding accessories on and off, and has a hollow interior providing for maximum strength.