Use the array of accessories found in the 15mm LWS RED DIGITAL CINEMA DSMC2 Accessory Kit from Wooden Camera to build up your DSMC2 BRAIN, WEAPON, EPIC WEAPON, SCARLET WEAPON, or RAVEN. This kit includes an Easy Riser plate, a 15mm LWS rod bracket, a pair of 6" 15mm rods, an 8" Safety Dovetail Plate, a Pass-Through Top Plate, a Trigger Handle, and an A-Box 3.5mm to XLR audio adapter. Read more about these kit items below.

Wooden Camera Pass-Through Top Plate for RED DSMC2 Cameras

The Wooden Camera Pass-Through Top Plate for RED DSMC2 Cameras attaches to the top of your DSMC2 camera using four captive screws and provides additional accessory mounting points. The plate also incorporates the 26-pin LCD and 3-pin trigger connections, passing the signals through to the camera connections. This allows you to mount your RED LCD monitor and Trigger Grip as you would on your camera without the plate while providing multiple threaded accessory mounting points.

The plate incorporates 61 threaded 1/4"-20 mounting holes along the edges and top, as well as two 3/8"-16 threaded holes and 4 x 3/8"-16 threaded mounting holes with ARRI Anti-Twist divots. An additional two 3/8"-16 threaded mounting holes are reserved for use by the LCD connector. The Top Plate is vented, allowing air from your camera's top fans to pass without obstruction.

Wooden Camera Easy Riser Plate for Select RED Cameras

The Easy Riser Plate for Select RED Cameras from Wooden Camera is a riser shim plate designed to work with the RED Weapon, Scarlet Weapon, Raven, and any other DSMC2 camera. It may be used alongside the 19mm Bridgeplate, 15mm Studio, or other RED style bridge plates to achieve correct lens height studio rods. It may also be combined with the LW 15mm Bracket (Weapon/Scarlet-W/Raven) for lightweight rods at correct lens height.

It is important to note that this riser is also compatible with our original LW 15mm Bracket for the RED Epic/Scarlet.

Wooden Camera 15mm Dual-Rod Bracket for RED DSMC2 Cameras

Combine this 15mm Dual-Rod Bracket from Wooden Camera with the separately available RED Easy Riser and equip lightweight 15mm rods at the correct lens height for RED DSMC2 BRAINS like the MONSTRO, HELIUM, GEMINI, WEAPON, EPIC WEAPON, SCARLET WEAPON, RAVEN, and other DSMC2 cameras.

Wooden Camera Dovetail Clamp

The Wooden Camera Dovetail Clamp allows you to attach cameras, baseplates, or accessories to an ARRI standard dovetail. It features slots at multiple locations for inserting mounting screws from underneath, and comes with two 3/8"-16 and two 1/4"-20 low profile screws.

Wooden Camera Safety Dovetail Plate (8")

The 8" Safety Dovetail Plate from Wooden Camera is an ARRI standard dovetail with a stopper screw on one end and a safety latch on the other to prevent accidental camera detachment. It features threaded 1/4-20 and 3/8-16 holes for accessory mounting and tripod attachment. The dovetail can be attached to a shoulder pad for custom handheld configurations.

Wooden Camera A-Box for RED KOMODO, WEAPON, EPIC-W, SCARLET-W, RAVEN, and DSMC2

Plug XLR audio sources into your RED KOMODO, WEAPON, EPIC-W, SCARLET-W, RAVEN, or another DSMC2 camera body with the A-Box from Wooden Camera. The A-Box provides two 3-pin XLR inputs and outputs to the RED Base Expander Module using its 3.5mm stereo audio jack. It secures to your camera rig using the built-in 19mm rod clamp or with the included 15mm rod bushing. A 1/4"-20 mounting solution using a short bolt-on 19mm rod is also included for mounting the A-Box without rods.

• RED KOMODO, WEAPON, EPIC-W, SCARLET-W, RAVEN, and other DSMC2 cameras
  RED Base Expander Module (required, not included)

Wooden Camera 15mm Support Rod (3")

This is a single, 3" long 15mm Support Rod from Wooden Camera for mounting accessories. It is chamfered at each end to ease sliding accessories on and off, and has a hollow interior providing for maximum strength.

Use the array of accessories found in the 15mm LWS RED DIGITAL CINEMA DSMC2 Accessory Kit from Wooden Camera to build up your DSMC2 BRAIN, WEAPON, EPIC WEAPON, SCARLET WEAPON, or RAVEN. This kit includes an Easy Riser plate, a 15mm LWS rod bracket, a pair of 6" 15mm rods, an 8" Safety Dovetail Plate, a Pass-Through Top Plate, a Trigger Handle, and an A-Box 3.5mm to XLR audio adapter. Read more about these kit items below.

Wooden Camera Pass-Through Top Plate for RED DSMC2 Cameras

The Wooden Camera Pass-Through Top Plate for RED DSMC2 Cameras attaches to the top of your DSMC2 camera using four captive screws and provides additional accessory mounting points. The plate also incorporates the 26-pin LCD and 3-pin trigger connections, passing the signals through to the camera connections. This allows you to mount your RED LCD monitor and Trigger Grip as you would on your camera without the plate while providing multiple threaded accessory mounting points.

The plate incorporates 61 threaded 1/4"-20 mounting holes along the edges and top, as well as two 3/8"-16 threaded holes and 4 x 3/8"-16 threaded mounting holes with ARRI Anti-Twist divots. An additional two 3/8"-16 threaded mounting holes are reserved for use by the LCD connector. The Top Plate is vented, allowing air from your camera's top fans to pass without obstruction.

Wooden Camera Easy Riser Plate for Select RED Cameras

The Easy Riser Plate for Select RED Cameras from Wooden Camera is a riser shim plate designed to work with the RED Weapon, Scarlet Weapon, Raven, and any other DSMC2 camera. It may be used alongside the 19mm Bridgeplate, 15mm Studio, or other RED style bridge plates to achieve correct lens height studio rods. It may also be combined with the LW 15mm Bracket (Weapon/Scarlet-W/Raven) for lightweight rods at correct lens height.

It is important to note that this riser is also compatible with our original LW 15mm Bracket for the RED Epic/Scarlet.

Wooden Camera 15mm Dual-Rod Bracket for RED DSMC2 Cameras

Combine this 15mm Dual-Rod Bracket from Wooden Camera with the separately available RED Easy Riser and equip lightweight 15mm rods at the correct lens height for RED DSMC2 BRAINS like the MONSTRO, HELIUM, GEMINI, WEAPON, EPIC WEAPON, SCARLET WEAPON, RAVEN, and other DSMC2 cameras.

Wooden Camera Dovetail Clamp

The Wooden Camera Dovetail Clamp allows you to attach cameras, baseplates, or accessories to an ARRI standard dovetail. It features slots at multiple locations for inserting mounting screws from underneath, and comes with two 3/8"-16 and two 1/4"-20 low profile screws.

Wooden Camera Safety Dovetail Plate (8")

The 8" Safety Dovetail Plate from Wooden Camera is an ARRI standard dovetail with a stopper screw on one end and a safety latch on the other to prevent accidental camera detachment. It features threaded 1/4-20 and 3/8-16 holes for accessory mounting and tripod attachment. The dovetail can be attached to a shoulder pad for custom handheld configurations.

Wooden Camera A-Box for RED KOMODO, WEAPON, EPIC-W, SCARLET-W, RAVEN, and DSMC2

Plug XLR audio sources into your RED KOMODO, WEAPON, EPIC-W, SCARLET-W, RAVEN, or another DSMC2 camera body with the A-Box from Wooden Camera. The A-Box provides two 3-pin XLR inputs and outputs to the RED Base Expander Module using its 3.5mm stereo audio jack. It secures to your camera rig using the built-in 19mm rod clamp or with the included 15mm rod bushing. A 1/4"-20 mounting solution using a short bolt-on 19mm rod is also included for mounting the A-Box without rods.

• RED KOMODO, WEAPON, EPIC-W, SCARLET-W, RAVEN, and other DSMC2 cameras
  RED Base Expander Module (required, not included)

Wooden Camera 15mm Support Rod (3")

This is a single, 3" long 15mm Support Rod from Wooden Camera for mounting accessories. It is chamfered at each end to ease sliding accessories on and off, and has a hollow interior providing for maximum strength.