Wooden Camera D-Box Power Distribution Base Unit
Wooden Camera D-Box Power Distribution Base Unit
SKU:
200300
Availability:
Enquire for ETA
Write a Review
Wooden Camera
Wooden Camera D-Box Power Distribution Base Unit
Wooden Camera D-Box Power Distribution Base Unit. Create your own power distribution box for your camera rig using this D-Box Power Distribution Base Unit from Wooden Camera. The base unit allows you to create a custom power D-Box with separately available connectors such as 2-pin LEMO-type, 4-pin LEMO-type, 4-pin Hirose, 3-pin Fischer-type, D-Tap, and USB options (all sold separately).
A standard 4-pin mini-XLR input is pre-installed to provide power to the base unit, and a D-Tap to 4-pin mini-XLR cable is included. The D-Box provides the ability to output up to five simultaneous power outputs with a maximum draw of 3A per output. It provides an accessible fuse to prevent any overcurrent situations.
- Customize a Power Distribution Box
- Add Optional Connectors
- 5 x Selectable Outputs
- Supports D-Tap, LEMO- and Fischer-Type
- Also Supports USB or Can be Left Blank
- 4-Pin Mini-XLR Power Input Installed
- D-Tap to Mini-XLR Cable Included
Wooden Camera D-Box Power Distribution Base Unit
Create your own power distribution box for your camera rig using this D-Box Power Distribution Base Unit from Wooden Camera. The base unit allows you to create a custom power D-Box with separately available connectors such as 2-pin LEMO-type, 4-pin LEMO-type, 4-pin Hirose, 3-pin Fischer-type, D-Tap, and USB options (all sold separately). A standard 4-pin mini-XLR input is pre-installed to provide power to the base unit, and a D-Tap to 4-pin mini-XLR cable is included.The D-Box provides the ability to output up to five simultaneous power outputs with a maximum draw of 3A per output. It provides an accessible fuse to prevent any overcurrent situations. A side panel allows you to install the optional connectors or change the fuse without the need for any soldering. The D-Box is designed to mount between a V-mount or a Gold mount plate and your camera to provide power output options for your rig.
- Including compatibility with but not limited to:
Wooden Camera Rod Clamp (15mm LWS) 150200
Wooden Camera Rod Clamp (15mm Studio) 150300
Wooden Camera Rod Clamp (19mm) 150400
Wooden Camera Battery Slide 156600
Wooden Camera Recorder Slide 191100
Wooden Camera 1 to 4 D-Tap Splitter Cable 182900
Battery plates (matching screw threads):
Wooden Camera Jetpack/Battery Pack
Wooden Camera Swit/IDX V-mount plate
Wooden Camera Anton Bauer QRC (High and Low Position)
Wooden Camera RED/Blueshape plates - Add separately available connectors, such as:
2-pin LEMO-type
4-pin LEMO-type
4-pin Hirose-type
3-pin Fischer-type
D-Tap
USB
Blank
| Material of Construction | Metal |
| Power Input Connector | 4-Pin Mini-XLR |
| Mounting Threads | 3 x 1/4"-20 |
| Dimensions | 5 x 3 x 1" / 127 x 76.2 x 25.4 mm |
| Weight | 6.4 oz / 181.4 g |
| Package Weight | 0.43Kg |
| Box Dimensions (LxWxH) | 22.35cm x 16.26cm x 11.18cm |
In The Box
- 1 x Wooden Camera D-Box Power Distribution Base Unit
- 1 x D-Tap to Mini-XLR Pigtail Cable
- 1 x Limited 1-Year Warranty
Wooden Camera D-Box Power Distribution Base Unit
Create your own power distribution box for your camera rig using this D-Box Power Distribution Base Unit from Wooden Camera. The base unit allows you to create a custom power D-Box with separately available connectors such as 2-pin LEMO-type, 4-pin LEMO-type, 4-pin Hirose, 3-pin Fischer-type, D-Tap, and USB options (all sold separately). A standard 4-pin mini-XLR input is pre-installed to provide power to the base unit, and a D-Tap to 4-pin mini-XLR cable is included.The D-Box provides the ability to output up to five simultaneous power outputs with a maximum draw of 3A per output. It provides an accessible fuse to prevent any overcurrent situations. A side panel allows you to install the optional connectors or change the fuse without the need for any soldering. The D-Box is designed to mount between a V-mount or a Gold mount plate and your camera to provide power output options for your rig.
- Including compatibility with but not limited to:
Wooden Camera Rod Clamp (15mm LWS) 150200
Wooden Camera Rod Clamp (15mm Studio) 150300
Wooden Camera Rod Clamp (19mm) 150400
Wooden Camera Battery Slide 156600
Wooden Camera Recorder Slide 191100
Wooden Camera 1 to 4 D-Tap Splitter Cable 182900
Battery plates (matching screw threads):
Wooden Camera Jetpack/Battery Pack
Wooden Camera Swit/IDX V-mount plate
Wooden Camera Anton Bauer QRC (High and Low Position)
Wooden Camera RED/Blueshape plates - Add separately available connectors, such as:
2-pin LEMO-type
4-pin LEMO-type
4-pin Hirose-type
3-pin Fischer-type
D-Tap
USB
Blank
| Material of Construction | Metal |
| Power Input Connector | 4-Pin Mini-XLR |
| Mounting Threads | 3 x 1/4"-20 |
| Dimensions | 5 x 3 x 1" / 127 x 76.2 x 25.4 mm |
| Weight | 6.4 oz / 181.4 g |
| Package Weight | 0.43Kg |
| Box Dimensions (LxWxH) | 22.35cm x 16.26cm x 11.18cm |
In The Box
- 1 x Wooden Camera D-Box Power Distribution Base Unit
- 1 x D-Tap to Mini-XLR Pigtail Cable
- 1 x Limited 1-Year Warranty
0 Reviews Hide Reviews Show Reviews
Related Products
Wooden Camera
Wooden Camera D-Box V-Mount Base Unit for Power Distribution
Wooden Camera
Wooden Camera D-Box for RED DSMC2 Cameras (Power Distribution Portion Only)
Wooden Camera
Wooden Camera D-Box V-Mount Battery Side to Gold Mount Camera Side Base Unit
Wooden Camera