The Blackmagic URSA Mini/Mini Pro Unified Accessory Kit (Pro) from Wooden Camera is designed for the Blackmagic URSA Mini and Mini Pro cameras. The URSA Mini accessory package includes a Top Plate (URSA Mini), Unified Baseplate, NATO Handle Kit (Plus, 70mm), UVF Mount (No Clamp), two 15mm Rods (15"), and Safety Dovetail (12").

The Top Plate (URSA Mini) is a top mounting cheese plate for the Blackmagic URSA Mini Camera. It attaches to camera top by (4) 1/4-20 screws and features arrays of 1/4-20 holes in standard 9mm spacing and multiple 3/8-16 holes for large accessories. It includes a tape hook for accurate focus measuring.

The Unified Baseplate is designed for use with the URSA Mini camera. It is a quick release baseplate that provides lightweight 15mm rod support at the correct lens height. 15mm rods pass through front to back and have 2 locking thumbscrews per side. The baseplate releases quickly in two ways, giving the user the option to take the 15mm lightweight rods or to leave them behind.

The NATO Handle Kit consists of a quick-release top handle and 2.8" (70mm) NATO rail, offers a variety of mounting points for attaching viewfinders, focus motors, lights, shock mounts, and other accessories. The handle features a sideways 15mm rod port, 15mm rod opening in front, 19mm rod opening in the rear, shoe mount, and 1/4"-20 and 3/8"-16 mounting threads all around.

The UVF Mount allows you to support an EVF or monitor from an available 15mm rod port on your rig. It is similar to the UVF v2 Mount but doesn't include a 15mm rod clamp. Instead, it is designed to be used with top handles or other on-camera hardware that have a rod clamp built-in.

The two 15mm Single Support Rods (12") are used for mounting accessories including follow focus systems, matte boxes, lens supports, and servo motors. This is a single 15mm support rod.

The 12" Safety Dovetail Plate is an ARRI standard dovetail with a stopper screw on one end and a safety latch on the other to prevent accidental camera detachment.

Wooden Camera Top-Mounted Cheese Plate for Blackmagic URSA Mini/Mini Pro/12k

The Top-Mounted Cheese Plate for Blackmagic URSA Mini/Mini Pro/12k from Wooden Camera attaches to the camera top by the included 1/4"-20 screws. It is festooned with 1/4"-20 holes with standard 9mm spacing and multiple 3/8"-16 holes for mounting large accessories without stressing your camera's body. Multiple ARRI accessory mounts (3/8"-16 threaded hole with locating divots) are also machined into the top and side of the plate. The plate includes a tape hook for accurate focus measuring. The original Blackmagic handle can be reinstalled on the Top Plate, using the center 1/4" holes.

Wooden Camera Unified Baseplate for URSA Mini, F55, F5

The Wooden Camera Unified Baseplate supports 15mm LWS rods at the correct lens height, and it offers a vertical 15mm rod port for incorporating the optional Unified Lens Adapter Kit. This Kit allows you to support different lens adapters from Wooden Camera, Metabones, and other brands.

The Baseplate includes the Core Unit, a Lower Quick Dovetail tripod plate on the bottom, and a Dovetail Camera Plate for the Blackmagic URSA Mini and Sony F55/F5. Other Unified Baseplate Dovetail Plates are also supported, allowing for quick swaps with a variety of cameras.

The Baseplate provides two quick release options. You can remove the Dovetail Camera Plate only and leave the Core Unit with your rod pair behind, or you can remove the Core Unit from the Lower Quick Dovetail, in which case you'll have a dovetail on the bottom of the Core Unit that's compatible with any 2060 Dovetail, Safety Dovetail, or Shoulder Rig.

The Dovetail Camera Plate features a long slot along its center that lets you secure it to the camera with multiple screws (included), which can be set up to 2.8" (70mm) apart. It also has a non-slip rubber surface that will prevent the camera from twisting.

The Dovetail Camera Plate has an ARCA Swiss standard dovetail compatible with many third-party products. It also has threaded 1/4"-20 threaded holes on the bottom for attaching to gimbals or other compatible tripod plates. The Lower Quick Dovetail has 1/4"-20 and 3/8"-16 threaded holes for attaching to tripod plates or ARRI standard bridgeplates, such as the Wooden Camera Unified Bridgeplates.

The Unified Baseplate can also be upgraded for VCT-14 compatible mounting options. Simply attach it to the optional Unified VCT Wedge Plate, which can then be mounted on the Unified VCT-14 Tripod Plate, also sold separately. The Unified Baseplate is backward compatible with Wooden Camera's original Quick Dovetails (Standard, DSLR, and Large).

• Supports 15mm LWS rods at the correct lens height
• Offers a vertical 15mm rod port for incorporating the optional Unified Lens Adapter Kit (for lens adapter support)
• Includes the Core Unit, Lower Quick Dovetail tripod plate, and Dovetail Camera Plate
• Two quick release options—remove Core Unit or remove Dovetail Camera Plate
• Core Unit features a dovetail on the bottom, compatible with any 2060 Dovetail, Safety Dovetail, or Shoulder Rig
• Dovetail Camera Plate features an ARCA Swiss standard dovetail and threaded holes for attaching to gimbals or other compatible tripods plates
• Lower Quick Dovetail offers threaded holes for attaching to tripod plates or ARRI standard bridgeplates
• Long slot along the center allows multiple screws to be attached to the camera, set up to 2.8" (70mm) apart
• Anti-twist, non-slip rubber surface
• Upgradable for VCT-14 compatible mounting options
• Additional Lower Quick Dovetail and Dovetail Camera Plates can be purchased for quick swap capability
• Backward compatible with original Wooden Camera Quick Dovetail

Wooden Camera NATO Handle Kit (Plus, 70mm Rail)

This Wooden Camera NATO Handle Kit, consisting of a quick release top handle and 2.8" / 70mm NATO rail, offers a variety of mounting points for attaching viewfinders, focus motors, lights, shock mounts, and other accessories.

The handle features a sideways 15mm rod port, 15mm rod opening in front, 19mm rod opening in the rear, shoe mount, and 1/4"-20 and 3/8"-16 mounting threads all around. The sideways 15mm rod port is ideal for attaching Wooden Camera's UVF Mount or other viewfinder mounts. Two 1/4"-20 socket screws are included for binding rods in the front and rear rod openings.

The NATO rail can be attached to any two 1/4"-20 threads positioned up to 42mm apart, such as on a cage or select cameras. The handle conveniently slides on and off and secures in place by a lever. A rotating knob on top allows the handle to be adjusted sideways or reversed to the rear by a rosette-like mechanism.

• The handle features an integrated NATO rail clamp that lets you slide onto any NATO compatible rail, not just the included one.
• The handle position can be adjusted by loosening the top screw, rotating it into the desired position, and then re-tightening the top screw. This gives you a level of versatility you typically don't find in top handles.
• The side rod opening lets you attach a 15mm rod perpendicular to your camera, great for attaching an optional monitor/EVF support bracket such as Wooden Camera's UVF Mount v2. A thumbscrew secures the rod in place.
• A forward facing 15mm rod opening and 19mm rear rod opening are available for attaching optional single rods, which can be used for mounting accessories such as focus motors. A pair of 1/4"-20 set screws are included to secure the rods in place via the threaded holes along the sides of the grip area.
• A cold shoe built into the top of the handle lets you add on-camera lights, microphone shock mounts, or other shoe mount accessories.
• 1/4"-20 and 3/8"-16 threaded holes along the grip area of the handle are provided for attaching additional accessories.
• Two 1/4"-20 thread holes on the front of the handle let you attach an optional 15mm or 19mm rod clamp to the base of the handle.

Wooden Camera UVF Mount (No Clamp)

The Wooden Camera UVF Mount allows you to support an EVF or monitor from an available 15mm rod port on your rig. It is similar to the UVF v2 Mount but doesn't include a 15mm rod clamp. Instead, it is designed to be used with top handles or other on-camera hardware that have a rod clamp built-in. It features a NATO rail kit, UVF v2 sled, and L-bracket that combine to offer tilt, horizontal, and vertical adjustments for positioning your EVF or monitor.

The NATO rail kit consists of a 15mm rod with a 4" NATO rail attached. The rod portion slots into a sideways-oriented rod clamp on your top handle or rig, allowing for tilt and distance adjustment. The included UVF v2 sled slides onto the NATO rail, securing into place using a thumbscrew, and provides attachment points for the L-bracket. The Sled can also attach to any NATO-standard rail.

Your EVF or monitor attaches to the L-bracket, which supports devices with two 1/4"-20 screw holes spaced between 25mm and 36mm center to center. An adapter for using Alphatron, SmallHD, and other viewfinders with a single 1/4"-20 thread comes included. A safety pin at the end of the NATO rail prevents the mounting bracket and your monitor or EVF from accidental removal.

• UVF Mount without 15mm rod clamp
• Use with top handles or rigs with a built-in sideways-oriented 15mm rod clamp
• Accepts most EVFs and on-screen monitors
• Tension thumbscrew to adjust tilt
• NATO rail kit with 15mm rod and 4" NATO rail
• UVF v2 sled attaches to any NATO compatible rail
• Safety pin prevents accidental removal
• L-bracket supports to two 1/4"-20 screw holes spaced between 25mm and 36mm center to center
• Adapter for devices with single 1/4"-20 screw hole
• Quick installation and removal
• Screws and Allen wrenches included

Wooden Camera 15mm Support Rod (15")

This is a single, 15" long 15mm Support Rod from Wooden Camera for mounting accessories. It is chamfered at each end to ease sliding accessories on and off, and has a hollow interior providing for maximum strength.

Wooden Camera Safety Dovetail Plate (12")

The 12" Safety Dovetail Plate from Wooden Camera is an ARRI standard dovetail with a stopper screw on one end and a safety latch on the other to prevent accidental camera detachment. It features threaded 1/4-20 and 3/8-16 holes for accessory mounting and tripod attachment. The dovetail can be attached to a shoulder pad for custom handheld configurations.