Wooden Camera AJA CION Pro Accessory Kit with V-Mount Battery Plate

The Wooden Camera Top Plate for AJA CION attaches via four 1/4"-20 screws to the camera top and features rows of 1/4"-20 and 3/8"-16 holes in standard spacing. The original CION handle included with the camera can be re-installed on top plate. ARRI style accessory mounts with 3/8"-16 threads and locating pins are present on top and side. Integrated HDMI clamping mechanism locks cables securely in place and prevents strain or damage. Open area over the removable CION cover plate for servicing flange focus.

Note: Tape hook should be removed from top and installed on camera side.The Fixed Base for AJA CION from Wooden Camera provides LWS 15mm pass-through rod support at the correct lens height. The baseplate can attach to any tripod plate or ARRI standard bridge plate, such as Wooden Camera's 19mm or 15mm Studio Bridge Plates. When rods are not needed, a separately-available Dovetail Clamp can be added instead to interface with 2060 Dovetails, Safety Dovetails, or Shoulder Rigs.This is a single, 9" long 15mm Support Rod from Wooden Camera for mounting accessories. It is chamfered at each end to ease sliding accessories on and off, and has a hollow interior providing for maximum strength.This Wooden Camera NATO Handle Kit, consisting of a quick release top handle and 3.9" / 100mm NATO rail, offers a variety of mounting points for attaching viewfinders, focus motors, lights, shock mounts, and other accessories.

The handle features a sideways 15mm rod port, 15mm rod opening in front, 19mm rod opening in the rear, shoe mount, and 1/4"-20 and 3/8"-16 mounting threads all around. The sideways 15mm rod port is ideal for attaching Wooden Camera's UVF Mount or other viewfinder mounts. Two 1/4"-20 socket screws are included for binding rods in the front and rear rod openings.

The NATO rail can be attached to any two 1/4"-20 threads positioned up to 72mm apart, such as on a cage or select cameras. The handle conveniently slides on and off and secures in place by a lever. A rotating knob on top allows the handle to be adjusted sideways or reversed to the rear by a rosette-like mechanism.The Wooden Camera Dovetail Clamp allows you to attach cameras, baseplates, or accessories to an ARRI standard dovetail. It features slots at multiple locations for inserting mounting screws from underneath, and comes with two 3/8"-16 and two 1/4"-20 low profile screws.The 12" Safety Dovetail Plate from Wooden Camera is an ARRI standard dovetail with a stopper screw on one end and a safety latch on the other to prevent accidental camera detachment. It features threaded 1/4-20 and 3/8-16 holes for accessory mounting and tripod attachment. The dovetail can be attached to a shoulder pad for custom handheld configurations.The Rear Rod Adapter (CION, 15mm LW) from Wooden Camera attaches to the two 1/4"-20 holes at the bottom rear of a AJA CION camera to provide 15mm LW rear rod support. This adapter is ideal for holding a second set of rear rods without obstructing access to the integrated camera shoulder pad. It is the correct height for passing through 15mm LW rods from Fixed Base (CION) all the way to the back.The Battery Slide from Wooden Camera features an Anton Bauer gold mount battery plate and an AJA CION Molex connector. This custom battery slide attaches directly to the Molex connector on the back of the camera so you have the ability to also plug in an AC adapter or block battery to the XLR power input on the camera and hot swap between the two without powering down. The battery plate position can be adjusted by loosening the thumbscrew. The AJA CION camera with the rear low profile Battery Slide fits into its camera case.

• 1/4"-20 and 3/8"-16 holes on sides for attaching accessories
• 1/4"-20 and 3/8"-16 holes on bottom for attaching to tripod or bridge plate
• Optional GO Shoulder low-profile shoulder pad and optional Rosette Bracket available

NATO Quick Release

In The Box

• 1 x Wooden Camera Top Plate for AJA CION
• 1 x Wooden Camera Fixed Base for AJA CION
• 2 x Wooden Camera 15mm Support Rod (9")
• 1 x Wooden Camera NATO Handle Kit (Plus, 100mm Rail)
• 1 x Wooden Camera Dovetail Clamp
• 1 x Wooden Camera Safety Dovetail Plate (12")
• 1 x Wooden Camera Rear Rod Adapter (CION, 15mm LW)
• 1 x Wooden Camera Battery Slide with Gold Mount Plate and AJA CION Molex Connector