Teradek CTRL.3 Motor Wireless Lens Control Deluxe 1-Motor Kit
Teradek CTRL.3 Motor Wireless Lens Control Deluxe 1-Motor Kit
SKU:
15-0047-1
Availability:
Call for Availability
Write a Review
Teradek
Teradek CTRL.3 Motor Wireless Lens Control Deluxe 1-Motor Kit
Use the Teradek RT MOTR.X Brushless Lens Motor with Teradek RT series receivers and controllers to control your focus, iris, or zoom with its super-speed, high-torque design. The motor comes with a standard 0.8 MOD cine gear which can be swapped out for different-size, separately available gears. Its durable aluminum design helps it prevent damage in the field. The MOTR.X features one input and one output motor control port, and it can be daisy-chained with other MOTR.X motors to limit the need for additional cabling.
The ultra-quiet motor's 3Nm torque allows you to control your lens with ease and speed at up to 6.2 revolutions per second. The built-in rod clamp supports mounting on 15 or 19mm rods.This RT Controller Neck Strap from Teradek is designed to carry the MK3.1 controller hand unit.
- Latitude MDR-X Receiver
- MOTR.X Super-Speed Brushless Lens Motor
- CTRL.3 Wireless Lens Controller
- 5 x White Marking Disks
- 1 x Iris, 10 x Focus Mapping Disks
- LP-E6 Batteries with Charger
- 19/15mm Rod Clamp with 1/4"-20 Mount
- Motor, Controller, USB, and Power Cables
- Hard-Shell Case with Custom Foam
- Controller Neck Strap Included
Teradek CTRL.3 Motor Wireless Lens Control Deluxe 1-Motor Kit
Use the Teradek RT MOTR.X Brushless Lens Motor with Teradek RT series receivers and controllers to control your focus, iris, or zoom with its super-speed, high-torque design. The motor comes with a standard 0.8 MOD cine gear which can be swapped out for different-size, separately available gears. Its durable aluminum design helps it prevent damage in the field.
The MOTR.X features one input and one output motor control port, and it can be daisy-chained with other MOTR.X motors to limit the need for additional cabling. The ultra-quiet motor's 3Nm torque allows you to control your lens with ease and speed at up to 6.2 revolutions per second. The built-in rod clamp supports mounting on 15 or 19mm rods.This RT Controller Neck Strap from Teradek is designed to carry the MK3.1 controller hand unit. Use this strap to position the control unit around your neck or across your body, or to drape the controller from a stand when not in use.The Paralinx Battery Charger from Teradek is designed for charging the LP-E6 compatible 7.4V/2000mAh battery pack for the Paralinx Triton transmitter unit.The RT Receiver Rod Clamp from Teradek is used to securely mount an RT receiver to a single 19mm or 15mm rod. Mount the Receiver Rod Clamp directly to the 1/4"-20 thread on an MDR-M or MK3.1 Receiver, or to the 1/4"-20 thread on the mounting bracket for the MDR-MB unit. This compact, double bracket's 1/4"-20 thumbscrew fastens to a 19mm rod on one flank, or to a 15mm rod on the other.Super-speed focus, iris, or zoom lens motorFeatures 3Nm torque and a maximum speed of 6.2 revolutions per secondOne input and one output motor control port allows for daisy-chaining with other MOTR.X motorsBuilt-in rod clamp allows mounting onto 15 or 19mm rodsConstructed with aluminum for durability
| Material of Construction | Aluminum |
| Connectors | Input: 1 x 0B.4 (Daisy-Chainable) Output: 1 x 0B.4 (Daisy-Chainable) |
| Gear Pitch | 0.8 MOD |
| Maximum Speed | 6.2 rps |
| Torque | 3 Nm Peak, 2 Nm Continuous |
| Rod Compatibility | 15 and 19 mm |
| Operating Voltage | 7 to 17 V |
| Power Input | <1 W Idle, 80 W Peak |
| Operating Temperature | -4 to 122°F / -20 to 50°C |
| Package Weight | 0.37Kg |
| Box Dimensions (LxWxH) | 15.24cm x 10.67cm x 5.59cm |
| Dimensions | Not specified by manufacturer |
| Package Weight | 0.1 lb |
| Box Dimensions (LxWxH) | 5.5 x 1.5 x 1.1" |
| Input Power | 100 to 240 VAC, 50 / 60 Hz, maximum 150 mA 12 to 24 VDC |
| Output Voltage | 4.2 VDC, 600 mA |
| Dimensions | Not specified by the manufacturer |
| Weight | Not specified by the manufacturer |
| Package Weight | 0.305 lb |
| Box Dimensions (LxWxH) | 6.8 x 5.8 x 2.65" |
| Rod Clamp Type | 15/19 mm |
| Mounting Screw | 1/4"-20 |
| Package Weight | 0.08 lb |
| Box Dimensions (LxWxH) | 1.55 x 1.5 x 1.45" |
In The Box
- 1 x Teradek RT MOTR.X Brushless Lens Motor
- 1 x Teradek RT Controller Neck Strap
- 1 x Teradek LP-E6 Compatible 7.4V/2000mAh Battery Charger with US Plug
- 1 x Teradek RT Receiver 19/15mm Rod Clamp with 1/4"-20 Mount
- 1 x Teradek RT Monitor Bracket for Hand Controllers
- 1 x RT CTRL.3 3-Axis Wireless Controller
- 1 x MDR.X Lens Control Receiver
- 2 x LP-E6 1600mAh Battery
- 1 x Straight-to-Straight End Motor Cable (8")
- 1 x Straight-to-Straight End Motor Cable (16")
- 1 x Straight-to-Straight End Motor Cable (24")
- 1 x MDR.X ARRI Run/Stop Cable
- 1 x MDR.X Sony F55 Run/Stop Cable
- 1 x MDR.X RED CTRL Cable (15.7")
- 1 x 5-Pin to Micro-USB Cable for SmallHD Monitor
- 1 x 5-Pin to 5-Pin Cable for SmallHD 703 Bolt Monitor
- 1 x 5-Pin to USB Type-A Cable for SmallHD Monitor
- 1 x 2-Pin to 2-Pin Connector Cable for ALEXA (18")
- 5 x White Marking Disk
- 1 x RT-CTRL Iris Strip Slider Set (0, 10, 20, 30)
- 5 x Focus Overlay Mapping Disk in Feet
- 5 x Focus Overlay Mapping Disk in Meters
- 1 x Pre-Marked Iris Ring (1-32)
- 1 x Vinyl Zipper Bag
- 1 x Hard-Shell Case with Custom Foam
- 1 x Limited 1-Year Warranty
Teradek CTRL.3 Motor Wireless Lens Control Deluxe 1-Motor Kit
Use the Teradek RT MOTR.X Brushless Lens Motor with Teradek RT series receivers and controllers to control your focus, iris, or zoom with its super-speed, high-torque design. The motor comes with a standard 0.8 MOD cine gear which can be swapped out for different-size, separately available gears. Its durable aluminum design helps it prevent damage in the field.
The MOTR.X features one input and one output motor control port, and it can be daisy-chained with other MOTR.X motors to limit the need for additional cabling. The ultra-quiet motor's 3Nm torque allows you to control your lens with ease and speed at up to 6.2 revolutions per second. The built-in rod clamp supports mounting on 15 or 19mm rods.This RT Controller Neck Strap from Teradek is designed to carry the MK3.1 controller hand unit. Use this strap to position the control unit around your neck or across your body, or to drape the controller from a stand when not in use.The Paralinx Battery Charger from Teradek is designed for charging the LP-E6 compatible 7.4V/2000mAh battery pack for the Paralinx Triton transmitter unit.The RT Receiver Rod Clamp from Teradek is used to securely mount an RT receiver to a single 19mm or 15mm rod. Mount the Receiver Rod Clamp directly to the 1/4"-20 thread on an MDR-M or MK3.1 Receiver, or to the 1/4"-20 thread on the mounting bracket for the MDR-MB unit. This compact, double bracket's 1/4"-20 thumbscrew fastens to a 19mm rod on one flank, or to a 15mm rod on the other.Super-speed focus, iris, or zoom lens motorFeatures 3Nm torque and a maximum speed of 6.2 revolutions per secondOne input and one output motor control port allows for daisy-chaining with other MOTR.X motorsBuilt-in rod clamp allows mounting onto 15 or 19mm rodsConstructed with aluminum for durability
| Material of Construction | Aluminum |
| Connectors | Input: 1 x 0B.4 (Daisy-Chainable) Output: 1 x 0B.4 (Daisy-Chainable) |
| Gear Pitch | 0.8 MOD |
| Maximum Speed | 6.2 rps |
| Torque | 3 Nm Peak, 2 Nm Continuous |
| Rod Compatibility | 15 and 19 mm |
| Operating Voltage | 7 to 17 V |
| Power Input | <1 W Idle, 80 W Peak |
| Operating Temperature | -4 to 122°F / -20 to 50°C |
| Package Weight | 0.37Kg |
| Box Dimensions (LxWxH) | 15.24cm x 10.67cm x 5.59cm |
| Dimensions | Not specified by manufacturer |
| Package Weight | 0.1 lb |
| Box Dimensions (LxWxH) | 5.5 x 1.5 x 1.1" |
| Input Power | 100 to 240 VAC, 50 / 60 Hz, maximum 150 mA 12 to 24 VDC |
| Output Voltage | 4.2 VDC, 600 mA |
| Dimensions | Not specified by the manufacturer |
| Weight | Not specified by the manufacturer |
| Package Weight | 0.305 lb |
| Box Dimensions (LxWxH) | 6.8 x 5.8 x 2.65" |
| Rod Clamp Type | 15/19 mm |
| Mounting Screw | 1/4"-20 |
| Package Weight | 0.08 lb |
| Box Dimensions (LxWxH) | 1.55 x 1.5 x 1.45" |
In The Box
- 1 x Teradek RT MOTR.X Brushless Lens Motor
- 1 x Teradek RT Controller Neck Strap
- 1 x Teradek LP-E6 Compatible 7.4V/2000mAh Battery Charger with US Plug
- 1 x Teradek RT Receiver 19/15mm Rod Clamp with 1/4"-20 Mount
- 1 x Teradek RT Monitor Bracket for Hand Controllers
- 1 x RT CTRL.3 3-Axis Wireless Controller
- 1 x MDR.X Lens Control Receiver
- 2 x LP-E6 1600mAh Battery
- 1 x Straight-to-Straight End Motor Cable (8")
- 1 x Straight-to-Straight End Motor Cable (16")
- 1 x Straight-to-Straight End Motor Cable (24")
- 1 x MDR.X ARRI Run/Stop Cable
- 1 x MDR.X Sony F55 Run/Stop Cable
- 1 x MDR.X RED CTRL Cable (15.7")
- 1 x 5-Pin to Micro-USB Cable for SmallHD Monitor
- 1 x 5-Pin to 5-Pin Cable for SmallHD 703 Bolt Monitor
- 1 x 5-Pin to USB Type-A Cable for SmallHD Monitor
- 1 x 2-Pin to 2-Pin Connector Cable for ALEXA (18")
- 5 x White Marking Disk
- 1 x RT-CTRL Iris Strip Slider Set (0, 10, 20, 30)
- 5 x Focus Overlay Mapping Disk in Feet
- 5 x Focus Overlay Mapping Disk in Meters
- 1 x Pre-Marked Iris Ring (1-32)
- 1 x Vinyl Zipper Bag
- 1 x Hard-Shell Case with Custom Foam
- 1 x Limited 1-Year Warranty
0 Reviews Hide Reviews Show Reviews
Related Products
Teradek
Teradek CTRL.3 Motor Wireless Lens Control Deluxe 3-Motor Kit
