Miller Skyline 70 Heavy-Duty Studio Alloy Tripod System
Miller Skyline 70 Heavy-Duty Studio Alloy Tripod System
SKU:
2075
Availability:
Enquire for ETA
Write a Review
Miller
Miller Skyline 70 Heavy-Duty Studio Alloy Tripod System
The Miller Skyline 70 Fluid Head is a large capacity head with a 150mm ball. The ball size, an 8-position counterbalance system, and a 4.7" quick-release camera platform together afford a load capacity from 10 to 82.5 lbs. A Euro camera plate is included.
Pan drag and tilt drag each also have 8 selectable positions (7+0), ranging from very light to heavy. Both pan and tilt drag feature a caliper disc brake system, and a quick-release tilt lock pin serve as the tilt lock for payload protection.
Miller Skyline 70 Heavy-Duty Studio Alloy Tripod System
The Miller Skyline 70 Fluid Head is a large capacity head with a 150mm ball. The ball size, an 8-position counterbalance system, and a 4.7" quick-release camera platform together afford a load capacity from 10 to 82.5 lbs. A Euro camera plate is included. Pan drag and tilt drag each also have 8 selectable positions (7+0), ranging from very light to heavy. Both pan and tilt drag feature a caliper disc brake system, and a quick-release tilt lock pin serve as the tilt lock for payload protection. Two telescopic handles are extendable from 15.4 to 23.2" each.The Miller 944 aluminum studio tripod is designed with single stage legs, 100mm bowl fixing, and extra heavy-duty construction for the utmost strength and torsional rigidity to take a full studio or ENG/EFP workload with confidence. The Miller Telescopic Pan Handle with Handle Carrier is a 220mm extension handle compatible with the following fluid heads:
Arrow25, Arrow40, and Arrow50 100mm heads
Compass25 100mm head
Skyline 70 150mm headThe 483 Studio Dolly combines height adjustable cable guards, for smoothing out studio floor litter, with independantly controllable wheel tracking. Tracking allows you to lock and glide the 483 dolly in a straight line across the studio floor, and also to rotate your dolly in a circular motion by engaging a single wheel. A reinforced centre hub with collapsible box tubing arms. Smooth action castors ensures the 483 Studio Dolly, to run smoothly and surely under all ENG, EFP and HD tripods.The Miller 993 is a mid-level spreader for Sprinter, Arrow 25/40 and HD tripod systems. This device offers variable adjustment in minimum and maximum height settings and a latch and swivel design.The 475 Tripod Feet from Miller are a set of three rubber snap-on feet designed to be used in any situation where the integrated dual spiked feet are not optimal. They are ideal for use on both slippery and glossy floors. These rubber feet are compatible with all tripods with a 993 mid level spreader.
10 to 82.5 lb Load Capacity
- 150mm ball
- 8-position counterbalance system
- 4.7" quick-release camera platform
- Euro camera plate included
- 7+0 pan and tilt drag
- Pan and tilt drag caliper disc brake system
- Quick-release tilt lock pin
- Two telescopic handles extend from 15.4 to 23.2" each
| Camera Plate Features | Sliding Balance Plate, Quick Release |
| Camera Plate Type | Large Euro Plate |
| Camera Mounting Screw | 2 x 3/8"-16 Male |
| Balance Plate Sliding Range | 4.7" / 120 mm |
| Safety Lock | Yes |
| Base Mount | 150 mm Half Ball |
| Drag Control | Tilt: 7-Step Plus 0 Pan: 7-Step Plus 0 |
| Drag Type | Fluid |
| Vertical Tilt | +90° to -75° |
| Panning Range | 360° |
| Independent Pan Lock | Yes |
| Independent Tilt Lock | Yes |
| Load Capacity | 9.9 to 82.5 lb / 4.5 to 37.4 kg |
| Counter Balance | Incremental 8-Step |
| Included Pan Handle Length | 15.4 to 23.2" / 39 to 59 cm |
| Bubble Level | 1 x Illuminated |
| Operating Temperature | -40 to 149°F / -40 to 65°C |
| Weight | 13.2 lb / 6 kg |
| Package Weight | 8.55Kg |
| Box Dimensions (LxWxH) | 40.94cm x 27.43cm x 25.65cm |
| Head Mount Type | 150 mm Bowl |
| Load Capacity | 200 lb / 90.7 kg |
| Maximum Working Height | 50" / 127 cm |
| Minimum Working Height | 23" / 58.4 cm |
| Folded Length | 31.0" / 78.7 cm |
| Materials | Aluminum |
| Weight | 10.2 lb / 4.6 kg |
| Leg Lock Type | Flip Lock |
| Leg Sections | 2 |
| Feet Features | Spiked |
| Package Weight | 16.4 lb |
| Box Dimensions (LxWxH) | 37 x 13.2 x 10.5" |
| Length | 15.4" (39cm) Extended Length 23.2" (59cm) |
| Weight | 0.8 lbs (0.38 kg) |
| Package Weight | 1.425 lb |
| Box Dimensions (LxWxH) | 18.35 x 6.55 x 6.5" |
| Tripod Foot Compatibility | Spiked Feet |
| Working Footprint | 21.1" / 53.59 cm |
| Adjustable Footprint | No |
| Load Capacity | 220 lb / 99.8 kg |
| Folded Length | 24" / 61 cm |
| Locking Wheels | Yes |
| Wheel Diameter | 4.9" / 12.5 cm |
| Cable Guards | Yes |
| Material | Aluminum |
| Weight | 13 lb / 5.9 kg |
| Package Weight | 19.75 lb |
| Box Dimensions (LxWxH) | 37 x 13 x 11" |
| Construction | Alloy |
| Type | Mid-Level |
| Adjustable | Continuously variable through all height settings |
| Minimum Length | 12.4" (315mm) |
| Maximum Length | 20.3" (515mm) |
| Weight | 1.7 lbs (0.75kg) |
| Package Weight | 2.385 lb |
| Box Dimensions (LxWxH) | 18.35 x 6.55 x 6.4" |
| Dimensions | L: 3.7" / L: 95.0 mm |
| Weight | 8 oz / 210 g |
| Package Weight | 0.65 lb |
| Box Dimensions (LxWxH) | 7.35 x 5.85 x 5.2" |
In The Box
- 1 x Miller Skyline 70 Fluid Head
- 1 x Miller 944 Studio Aluminum 1-Stage Heavy-Duty Tripod Legs (150mm Bowl) - Supports up to 200 lb (90.7 kg)
- 1 x Miller Telescopic Pan Handle with Handle Carrier
- 1 x Miller 483 Studio Dolly with Cable Guards and Tracking Locks - for Sprinter and HD Tripods
- 1 x Miller 993 Mid-level Spreader
- 1 x Miller 475 Rubber Feet Pads for Select Tripods (Set of 3)
Miller Skyline 70 Heavy-Duty Studio Alloy Tripod System
The Miller Skyline 70 Fluid Head is a large capacity head with a 150mm ball. The ball size, an 8-position counterbalance system, and a 4.7" quick-release camera platform together afford a load capacity from 10 to 82.5 lbs. A Euro camera plate is included. Pan drag and tilt drag each also have 8 selectable positions (7+0), ranging from very light to heavy. Both pan and tilt drag feature a caliper disc brake system, and a quick-release tilt lock pin serve as the tilt lock for payload protection. Two telescopic handles are extendable from 15.4 to 23.2" each.The Miller 944 aluminum studio tripod is designed with single stage legs, 100mm bowl fixing, and extra heavy-duty construction for the utmost strength and torsional rigidity to take a full studio or ENG/EFP workload with confidence. The Miller Telescopic Pan Handle with Handle Carrier is a 220mm extension handle compatible with the following fluid heads:
Arrow25, Arrow40, and Arrow50 100mm heads
Compass25 100mm head
Skyline 70 150mm headThe 483 Studio Dolly combines height adjustable cable guards, for smoothing out studio floor litter, with independantly controllable wheel tracking. Tracking allows you to lock and glide the 483 dolly in a straight line across the studio floor, and also to rotate your dolly in a circular motion by engaging a single wheel. A reinforced centre hub with collapsible box tubing arms. Smooth action castors ensures the 483 Studio Dolly, to run smoothly and surely under all ENG, EFP and HD tripods.The Miller 993 is a mid-level spreader for Sprinter, Arrow 25/40 and HD tripod systems. This device offers variable adjustment in minimum and maximum height settings and a latch and swivel design.The 475 Tripod Feet from Miller are a set of three rubber snap-on feet designed to be used in any situation where the integrated dual spiked feet are not optimal. They are ideal for use on both slippery and glossy floors. These rubber feet are compatible with all tripods with a 993 mid level spreader.
10 to 82.5 lb Load Capacity
- 150mm ball
- 8-position counterbalance system
- 4.7" quick-release camera platform
- Euro camera plate included
- 7+0 pan and tilt drag
- Pan and tilt drag caliper disc brake system
- Quick-release tilt lock pin
- Two telescopic handles extend from 15.4 to 23.2" each
| Camera Plate Features | Sliding Balance Plate, Quick Release |
| Camera Plate Type | Large Euro Plate |
| Camera Mounting Screw | 2 x 3/8"-16 Male |
| Balance Plate Sliding Range | 4.7" / 120 mm |
| Safety Lock | Yes |
| Base Mount | 150 mm Half Ball |
| Drag Control | Tilt: 7-Step Plus 0 Pan: 7-Step Plus 0 |
| Drag Type | Fluid |
| Vertical Tilt | +90° to -75° |
| Panning Range | 360° |
| Independent Pan Lock | Yes |
| Independent Tilt Lock | Yes |
| Load Capacity | 9.9 to 82.5 lb / 4.5 to 37.4 kg |
| Counter Balance | Incremental 8-Step |
| Included Pan Handle Length | 15.4 to 23.2" / 39 to 59 cm |
| Bubble Level | 1 x Illuminated |
| Operating Temperature | -40 to 149°F / -40 to 65°C |
| Weight | 13.2 lb / 6 kg |
| Package Weight | 8.55Kg |
| Box Dimensions (LxWxH) | 40.94cm x 27.43cm x 25.65cm |
| Head Mount Type | 150 mm Bowl |
| Load Capacity | 200 lb / 90.7 kg |
| Maximum Working Height | 50" / 127 cm |
| Minimum Working Height | 23" / 58.4 cm |
| Folded Length | 31.0" / 78.7 cm |
| Materials | Aluminum |
| Weight | 10.2 lb / 4.6 kg |
| Leg Lock Type | Flip Lock |
| Leg Sections | 2 |
| Feet Features | Spiked |
| Package Weight | 16.4 lb |
| Box Dimensions (LxWxH) | 37 x 13.2 x 10.5" |
| Length | 15.4" (39cm) Extended Length 23.2" (59cm) |
| Weight | 0.8 lbs (0.38 kg) |
| Package Weight | 1.425 lb |
| Box Dimensions (LxWxH) | 18.35 x 6.55 x 6.5" |
| Tripod Foot Compatibility | Spiked Feet |
| Working Footprint | 21.1" / 53.59 cm |
| Adjustable Footprint | No |
| Load Capacity | 220 lb / 99.8 kg |
| Folded Length | 24" / 61 cm |
| Locking Wheels | Yes |
| Wheel Diameter | 4.9" / 12.5 cm |
| Cable Guards | Yes |
| Material | Aluminum |
| Weight | 13 lb / 5.9 kg |
| Package Weight | 19.75 lb |
| Box Dimensions (LxWxH) | 37 x 13 x 11" |
| Construction | Alloy |
| Type | Mid-Level |
| Adjustable | Continuously variable through all height settings |
| Minimum Length | 12.4" (315mm) |
| Maximum Length | 20.3" (515mm) |
| Weight | 1.7 lbs (0.75kg) |
| Package Weight | 2.385 lb |
| Box Dimensions (LxWxH) | 18.35 x 6.55 x 6.4" |
| Dimensions | L: 3.7" / L: 95.0 mm |
| Weight | 8 oz / 210 g |
| Package Weight | 0.65 lb |
| Box Dimensions (LxWxH) | 7.35 x 5.85 x 5.2" |
In The Box
- 1 x Miller Skyline 70 Fluid Head
- 1 x Miller 944 Studio Aluminum 1-Stage Heavy-Duty Tripod Legs (150mm Bowl) - Supports up to 200 lb (90.7 kg)
- 1 x Miller Telescopic Pan Handle with Handle Carrier
- 1 x Miller 483 Studio Dolly with Cable Guards and Tracking Locks - for Sprinter and HD Tripods
- 1 x Miller 993 Mid-level Spreader
- 1 x Miller 475 Rubber Feet Pads for Select Tripods (Set of 3)
0 Reviews Hide Reviews Show Reviews
Related Products
Miller
Miller Skyline 70 Heavy-Duty Single-Stage Alloy Tripod System
Miller
Miller Skyline 70 Heavy-Duty 2-Stage Carbon Fiber Tripod System
