Miller DS-10 Fluid Head (75mm Ball Base)
Miller DS-10 Fluid Head (75mm Ball Base)
SKU:
182
Availability:
Enquire for ETA
The Miller DS-10 fluid head delivers the level of quality only found in more expensive (high-priced) heads, for today's compact digital camcorder shooters. Features a multi-step fluid drag system, an integrated counterbalance system combined with a sliding balance plate and a quick release and automatic locking system. Multi-Step Pan & Tilt Fluid Drag System.
The DS-10 fluid head incorporates Miller's multi-step Fluid Drag system ensuring smooth, consistent fluid drag control across all temperature ranges and through a wide range of light and heavy settings. Preset Counterbalancing.
- Supports 11 lbs
- Selectable Counterbalance
- Fluid Drag System with Friction Boost
Miller DS-10 Fluid Head (75mm Ball Base)
The Miller DS-10 fluid head delivers the level of quality only found in more expensive (high-priced) heads, for today's compact digital camcorder shooters. Features a multi-step fluid drag system, an integrated counterbalance system combined with a sliding balance plate and a quick release and automatic locking system.
Multi-Step Pan & Tilt Fluid Drag System
The DS-10 fluid head incorporates Miller's multi-step Fluid Drag system ensuring smooth, consistent fluid drag control across all temperature ranges and through a wide range of light and heavy settings.Preset Counterbalancing
The DS-10 uses a special designed counterbalanced system, to neutralize the effect of payloads and their centers of gravity.Quick Release Camera Platform
This device is fitted with a precision, quick release camera platform that incorporates a sliding balance plate for fine tune payload balancing.Safe at Any Temperature
Pressure or temperature does not influence the damping system, it has an operating range from -40°F to +149°F, and works without friction.| Camera Plate Features | Sliding Balance Plate, Quick Release |
| Camera Mounting Screw | 1 x 1/4"-20 Male 1 x 3/8"-16 Male |
| Base Mount | 75 mm Half Ball |
| Drag Control | Continuous |
| Vertical Tilt | +90° to -75° |
| Panning Range | 360° |
| Independent Pan Lock | Yes |
| Independent Tilt Lock | Yes |
| Load Capacity | 11 lb / 5 kg |
| Counter Balance | Incremental 2-Step (10 lb / ) |
| Bubble Level | 1 |
| Operating Temperature | -40 to 149°F / -40 to 65°C |
| Weight | 3.4 lb / 1.5 kg |
| Box Dimensions (LxWxH) | 45.72cm x 17.78cm x 12.70cm |
In The Box
- 1 x Miller DS-10 Fluid Head (75mm Ball Base)
- 0 x 1x Pan Bar (#686)
- 1 x Miller 490 Camera Mounting Plate with 1/4"-20 Screw and Locating Pin - for DS-10 Fluid Head
- 0 x Limited 3-Year Warranty
Miller DS-10 Fluid Head (75mm Ball Base)
The Miller DS-10 fluid head delivers the level of quality only found in more expensive (high-priced) heads, for today's compact digital camcorder shooters. Features a multi-step fluid drag system, an integrated counterbalance system combined with a sliding balance plate and a quick release and automatic locking system.
Multi-Step Pan & Tilt Fluid Drag System
The DS-10 fluid head incorporates Miller's multi-step Fluid Drag system ensuring smooth, consistent fluid drag control across all temperature ranges and through a wide range of light and heavy settings.Preset Counterbalancing
The DS-10 uses a special designed counterbalanced system, to neutralize the effect of payloads and their centers of gravity.Quick Release Camera Platform
This device is fitted with a precision, quick release camera platform that incorporates a sliding balance plate for fine tune payload balancing.Safe at Any Temperature
Pressure or temperature does not influence the damping system, it has an operating range from -40°F to +149°F, and works without friction.| Camera Plate Features | Sliding Balance Plate, Quick Release |
| Camera Mounting Screw | 1 x 1/4"-20 Male 1 x 3/8"-16 Male |
| Base Mount | 75 mm Half Ball |
| Drag Control | Continuous |
| Vertical Tilt | +90° to -75° |
| Panning Range | 360° |
| Independent Pan Lock | Yes |
| Independent Tilt Lock | Yes |
| Load Capacity | 11 lb / 5 kg |
| Counter Balance | Incremental 2-Step (10 lb / ) |
| Bubble Level | 1 |
| Operating Temperature | -40 to 149°F / -40 to 65°C |
| Weight | 3.4 lb / 1.5 kg |
| Box Dimensions (LxWxH) | 45.72cm x 17.78cm x 12.70cm |
In The Box
- 1 x Miller DS-10 Fluid Head (75mm Ball Base)
- 0 x 1x Pan Bar (#686)
- 1 x Miller 490 Camera Mounting Plate with 1/4"-20 Screw and Locating Pin - for DS-10 Fluid Head
- 0 x Limited 3-Year Warranty
0 Reviews Hide Reviews Show Reviews
Related Products
