Miller DS-10 DV Fluid Head and Solo Aluminum Tripod with Pan Handle and Bag
Miller DS-10 DV Fluid Head and Solo Aluminum Tripod with Pan Handle and Bag
SKU:
1640
Availability:
Enquire for ETA
Write a Review
Miller
Miller DS-10 DV Fluid Head and Solo Aluminum Tripod with Pan Handle and Bag
The Miller DS-10 fluid head delivers the level of quality only found in more expensive (high-priced) heads, for today's compact digital camcorder shooters. Features a multi-step fluid drag system, an integrated counterbalance system combined with a sliding balance plate and a quick release and automatic locking system. The Miller Solo DV aluminum tripod is a unbraced ultra-light support meant for rapid setup and breakdown while supporting a substantial load of 44 lb (20 kg).
The industry standard 75mm bowl will accommodate many fluid heads, and the spiked legs wind-down rubber pads assure the best footing no matter the terrain.This Miller Pan Bar Handle is compatible with the Miller DS5, DS10, DS20, and Miller Compass 23 fluid video heads. It connects and locks into either side of those heads with a clamp and bolt for right- or left-handed use.
- Supports 11 lb
- Selectable Counterbalance
- Fluid Drag System with Friction Boost
- 75mm Ball Leveling
- Telescopic 2-Stage Magnesium Alloy Legs
- Three-Fixed Position Leg Angle Locking
- Leg Height Range of 9 to 64"
- Legs Feature Twist-Locks
- Spikes with Spin-Down Rubber Feet
- Soft-Sided Carry Bag Included
Miller DS-10 DV Fluid Head and Solo Aluminum Tripod with Pan Handle and Bag
The Miller DS-10 fluid head delivers the level of quality only found in more expensive (high-priced) heads, for today's compact digital camcorder shooters. Features a multi-step fluid drag system, an integrated counterbalance system combined with a sliding balance plate and a quick release and automatic locking system. The Miller Solo DV aluminum tripod is a unbraced ultra-light support meant for rapid setup and breakdown while supporting a substantial load of 44 lb (20 kg). The industry standard 75mm bowl will accommodate many fluid heads, and the spiked legs wind-down rubber pads assure the best footing no matter the terrain.This Miller Pan Bar Handle is compatible with the Miller DS5, DS10, DS20, and Miller Compass 23 fluid video heads. It connects and locks into either side of those heads with a clamp and bolt for right- or left-handed use. A rubberized handle provides a comfortable means to move its aluminum-alloy shaft, which measures 15.4".
This angled pan bar handle can rotate within its clamp, allowing a downward-pointing orientation for right or left-handed use.The Miller 1518 Soft Tripod Case is a padded tripod carry case designed for the Miller DV Solo tripods. It has a Water-resistant nylon fabric with zippers on the bag and the outside pocket. The case is carried by interlocking carry handle straps.
Multi-Step Pan & Tilt Fluid Drag System
The DS-10 fluid head incorporates Miller's multi-step Fluid Drag system ensuring smooth, consistent fluid drag control across all temperature ranges and through a wide range of light and heavy settings.Preset Counterbalancing
The DS-10 uses a special designed counterbalanced system, to neutralize the effect of payloads and their centers of gravity.Quick Release Camera Platform
This device is fitted with a precision, quick release camera platform that incorporates a sliding balance plate for fine tune payload balancing.Safe at Any Temperature
Pressure or temperature does not influence the damping system, it has an operating range from -40°F to +149°F, and works without friction.Ultra rigid aluminum alloy and magnesium design 3-position Leg Angle locking - no spreaderSpike or wind-down rubber feetSoft padded tripod case1 large outside pocket ID windowCompatible with;
- Miller DV Solo Tripods
| Camera Plate Features | Sliding Balance Plate, Quick Release |
| Camera Mounting Screw | 1 x 1/4"-20 Male 1 x 3/8"-16 Male |
| Base Mount | 75 mm Half Ball |
| Drag Control | Continuous |
| Vertical Tilt | +90° to -75° |
| Panning Range | 360° |
| Independent Pan Lock | Yes |
| Independent Tilt Lock | Yes |
| Load Capacity | 11 lb / 5 kg |
| Counter Balance | Incremental 2-Step (10 lb / ) |
| Bubble Level | 1 |
| Operating Temperature | -40 to 149°F / -40 to 65°C |
| Weight | 3.4 lb / 1.5 kg |
| Box Dimensions (LxWxH) | 45.72cm x 17.78cm x 12.70cm |
| Head Mount Type | 75 mm Bowl |
| Load Capacity | 44 lb / 20 kg |
| Maximum Working Height | 63.5" / 161.4 cm |
| Minimum Working Height | 9.2" / 234 mm |
| Folded Length | 27.6" / 700 mm |
| Materials | Aluminum |
| Weight | 6.6 lb / 3 kg |
| Leg Lock Type | Twist Lock |
| Independent Leg Spread | Yes |
| Leg Sections | 3 |
| Feet Features | Retractable, Spiked |
| Package Weight | 5.90Kg |
| Box Dimensions (LxWxH) | 37.5 x 12.7 x 10.5" |
| Compatibility | Miller DS5 Video Head Miller DS10 Video Head Miller DS20 Video Head Miller Compass 23 Video Head |
| Material | Aluminum alloy with rubberized handle |
| Length | 15.4" (39.1 cm) |
| Weight | 0.6 lb (0.3 kg) |
| Package Weight | 1.14 lb |
| Box Dimensions (LxWxH) | 18.4 x 6.9 x 6.4" |
| Carrying/Transport Options | Connecting Handles |
| Type of Closure | Zipper |
| Exterior Material | Nylon |
| Padded | Yes |
| Interior Dimensions | H: 7.0 x W: 7.5 x L: 34.0" / H: 17.8 x W: 19.1 x L: 86.4 cm |
| Weight | 1.6 lb / 0.7 kg |
| Package Weight | 3 lb |
| Box Dimensions (LxWxH) | 37 x 12.5 x 10.5" |
In The Box
- 1 x Miller DS-10 Fluid Head (75mm Ball Base)
- 1 x Miller Solo DV Aluminum Tripod with 75mm bowl- Supports up to 44 lb (20 kg)
- 1 x Miller 681 Pan Bar Handle for Select Video Heads
- 1 x Miller 1518 Soft Tripod Case - for SOLO DV Tripods
0 Reviews Hide Reviews Show Reviews
Related Products
Miller
Miller 1643 Miller Solo DV Alloy Tripod (black) with DS-20 Fluid Head, Camera Plate, Pan Arm, and Soft Case- Supports up to 22 lb (10 kg)
Miller
Miller DS-10 Aluminum Tripod System - consists of: DS-10 Fluid Head, DS 1-Stage Tripod, Mid-Level Spreader and Softcase - Supports 10 lbs
