Miller DS-10 Aluminum Tripod System - consists of: DS-10 Fluid Head, DS 1-Stage Tripod, Mid-Level Spreader and Softcase - Supports 10 lbs
Miller DS-10 Aluminum Tripod System - consists of: DS-10 Fluid Head, DS 1-Stage Tripod, Mid-Level Spreader and Softcase - Supports 10 lbs
SKU:
828
Availability:
Enquire for ETA
Write a Review
Miller
Miller DS-10 Aluminum Tripod System - consists of: DS-10 Fluid Head, DS 1-Stage Tripod, Mid-Level Spreader and Softcase - Supports 10 lbs
The DS-10 is a complete, ready-to-go professional support system for DV lightweight camcorders. Comprised of an alloy diecast fluid head with 75mm ball leveling, lightweight alloy ENG tripod, detachable mid-level spreader, rubber feet and pan handle. The DS-10 offers the same control features, fluid drag design and accessories as Miller's larger broadcast products.
The result is lightweight support that delivers superior performance, with features like fully Variable Fluid Drag control, independent Pan/Tilt locks, counterbalancing to provide finger tip control through the entire tilt range and sliding quick release camera platform, for "fine tune" balancing.. DS-10 Fluid Head.
Miller DS-10 Aluminum Tripod System - consists of: DS-10 Fluid Head, DS 1-Stage Tripod, Mid-Level Spreader and Softcase - Supports 10 lbs
The DS-10 is a complete, ready-to-go professional support system for DV lightweight camcorders. Comprised of an alloy diecast fluid head with 75mm ball leveling, lightweight alloy ENG tripod, detachable mid-level spreader, rubber feet and pan handle. The DS-10 offers the same control features, fluid drag design and accessories as Miller's larger broadcast products. The result is lightweight support that delivers superior performance, with features like fully Variable Fluid Drag control, independent Pan/Tilt locks, counterbalancing to provide finger tip control through the entire tilt range and sliding quick release camera platform, for "fine tune" balancing.
DS-10 Fluid Head
Multi-Step Pan & Tilt Fluid Drag System
The multi-step Fluid Drag system ensures smooth, consistent fluid drag control across all temperature ranges and through a wide range of light and heavy settings. By being independent of payload weight, provides smooth "starts" and dead "stops" for precise framing without any backlash. The system is fully sealed within sub-assemblies for a leakproof, low maintenance life.Preset Counterbalancing
Uses a special designed counterbalanced system, to neutralize the effect of payloads and their centers of gravity. The built-in preset counterbalance system optimizes tilt control in the intended capacity range.Quick Release Camera Platform
Fitted with a precision, sliding quick release camera platform with self-engaging action. Ensuring rapid camera attachment, while the built-in safety lock guarantees camera safety during setup and pull-down.Built-in bubble for horizontal levelingTripod Legs
Aluminum alloy construction 75mm / 3" bowl baseSingle extension designMaximum height 52.0-inch (not including head) Toggle clamping system| Load Capacity | 10 lbs (4.53 kg) |
| Mount/Base | 75mm 3" Half Ball |
| Balance Plate | Yes, +/- 60mm Sliding Range |
| Pan & Tilt Range | 360°, +90/-70° |
| Pan & Tilt Drag | Static |
| Leveling Bubble/Illuminated | Yes / No |
| Material | Aluminum |
| Leg Stages/Sections | 1/2 |
| Minimum Height | 30.0" (76.2 cm) |
| Maximum Height | 59.0" (149.86 cm) |
| Folded Length | 39.5" (100.33 cm) |
| Weight | 10.36 lbs (4.7 kg) |
| Package Weight | 9.53Kg |
| Box Dimensions (LxWxH) | 137.67cm x 33.02cm x 30.48cm |
In The Box
- 1 x Miller DS-10 Aluminum Tripod System - consists of: DS-10 Fluid Head, DS 1-Stage Tripod, Mid-Level Spreader and Softcase - Supports 10 lbs
- 1 x DS-10 Fluid Head (#182)
- 1 x Aluminum Tripod Legs (#440)
- 1 x Non-Adjustable Mid-Level Spreader (#835)
- 1 x Rubber Feet (#550)
- 1 x 1x Pan Bar (#686)
- 1 x Camera Mounting Plate (#490) with Screw Adapter Carriage (#493)
- 1 x Softcase (#874)
- 1 x Carry Strap (#554)
- 1 x Limited 3-Year Warranty
Miller DS-10 Aluminum Tripod System - consists of: DS-10 Fluid Head, DS 1-Stage Tripod, Mid-Level Spreader and Softcase - Supports 10 lbs
The DS-10 is a complete, ready-to-go professional support system for DV lightweight camcorders. Comprised of an alloy diecast fluid head with 75mm ball leveling, lightweight alloy ENG tripod, detachable mid-level spreader, rubber feet and pan handle. The DS-10 offers the same control features, fluid drag design and accessories as Miller's larger broadcast products. The result is lightweight support that delivers superior performance, with features like fully Variable Fluid Drag control, independent Pan/Tilt locks, counterbalancing to provide finger tip control through the entire tilt range and sliding quick release camera platform, for "fine tune" balancing.
DS-10 Fluid Head
Multi-Step Pan & Tilt Fluid Drag System
The multi-step Fluid Drag system ensures smooth, consistent fluid drag control across all temperature ranges and through a wide range of light and heavy settings. By being independent of payload weight, provides smooth "starts" and dead "stops" for precise framing without any backlash. The system is fully sealed within sub-assemblies for a leakproof, low maintenance life.Preset Counterbalancing
Uses a special designed counterbalanced system, to neutralize the effect of payloads and their centers of gravity. The built-in preset counterbalance system optimizes tilt control in the intended capacity range.Quick Release Camera Platform
Fitted with a precision, sliding quick release camera platform with self-engaging action. Ensuring rapid camera attachment, while the built-in safety lock guarantees camera safety during setup and pull-down.Built-in bubble for horizontal levelingTripod Legs
Aluminum alloy construction 75mm / 3" bowl baseSingle extension designMaximum height 52.0-inch (not including head) Toggle clamping system| Load Capacity | 10 lbs (4.53 kg) |
| Mount/Base | 75mm 3" Half Ball |
| Balance Plate | Yes, +/- 60mm Sliding Range |
| Pan & Tilt Range | 360°, +90/-70° |
| Pan & Tilt Drag | Static |
| Leveling Bubble/Illuminated | Yes / No |
| Material | Aluminum |
| Leg Stages/Sections | 1/2 |
| Minimum Height | 30.0" (76.2 cm) |
| Maximum Height | 59.0" (149.86 cm) |
| Folded Length | 39.5" (100.33 cm) |
| Weight | 10.36 lbs (4.7 kg) |
| Package Weight | 9.53Kg |
| Box Dimensions (LxWxH) | 137.67cm x 33.02cm x 30.48cm |
In The Box
- 1 x Miller DS-10 Aluminum Tripod System - consists of: DS-10 Fluid Head, DS 1-Stage Tripod, Mid-Level Spreader and Softcase - Supports 10 lbs
- 1 x DS-10 Fluid Head (#182)
- 1 x Aluminum Tripod Legs (#440)
- 1 x Non-Adjustable Mid-Level Spreader (#835)
- 1 x Rubber Feet (#550)
- 1 x 1x Pan Bar (#686)
- 1 x Camera Mounting Plate (#490) with Screw Adapter Carriage (#493)
- 1 x Softcase (#874)
- 1 x Carry Strap (#554)
- 1 x Limited 3-Year Warranty
0 Reviews Hide Reviews Show Reviews
Related Products
Miller
Miller DS-20 Aluminum Tripod System - consists of: DS-20 Fluid Head, DS 2-Stage Tripod, Mid-Level Spreader and Softcase - Supports 20 lbs
Miller
Miller DS-20 Aluminum Tripod System - consists of: DS-20 Fluid Head, DS 2-Stage Tripod, On-Ground Spreader and Softcase - Supports 20 lbs
Miller
Miller DS-10 DV Fluid Head and Solo Aluminum Tripod with Pan Handle and Bag
Miller