Miller AIR Toggle LW Alloy System
Miller AIR Toggle LW Alloy System
SKU:
3015
Availability:
Enquire for ETA
The Air Fluid Head from Miller is constructed of light weight hi-strength die-cast alloy and rigid composite polymers, incorporating advanced precision fluid drag and two positions of counterbalance, with the ability to handle a wide range of payloads from 4.4 to 11 lb. The fluid drag system employs smooth start and soft stop technology, well balanced diagonal drag transitions and consistent drag resistance over temperatures ranging from -40 to 149°F.The Miller Toggle 1-Stage Alloy Tripod is designed to be a compact yet sturdy platform for your 75mm ball-base fluid head. The single-stage design allows for a 24.4 to 52.4" height range while maintaining a folded length of 32.7".
Each stage features its own rotary clamp for secure locking, enabling support for payloads up to 55 pounds. Compatible spreaders, rubber feet, and dollies are available separately.A Mid-Level Spreader is chosen when shooting is often performed on uneven surfaces, such as steps, rocky ground, slopes.
Miller AIR Toggle LW Alloy System
The Air Fluid Head from Miller is constructed of light weight hi-strength die-cast alloy and rigid composite polymers, incorporating advanced precision fluid drag and two positions of counterbalance, with the ability to handle a wide range of payloads from 4.4 to 11 lb. The fluid drag system employs smooth start and soft stop technology, well balanced diagonal drag transitions and consistent drag resistance over temperatures ranging from -40 to 149°F.The Miller Toggle 1-Stage Alloy Tripod is designed to be a compact yet sturdy platform for your 75mm ball-base fluid head. The single-stage design allows for a 24.4 to 52.4" height range while maintaining a folded length of 32.7". Each stage features its own rotary clamp for secure locking, enabling support for payloads up to 55 pounds. Compatible spreaders, rubber feet, and dollies are available separately.A Mid-Level Spreader is chosen when shooting is often performed on uneven surfaces, such as steps, rocky ground, slopes. It allows for rapid set-up and pull down by keeping tripod legs at an equal or preset distance relative to each other. Attaches to the center bracket of a tripod and folds down within tripod without having to take it off.The 550 Tripod Feet from Miller are a set of three rubber snap-on feet designed to be used in any situation where the integrated dual spiked feet are not optimal. They are ideal for use on both slippery and glossy floors. These rubber feet are compatible with all tripods featuring 835 and 508 above ground spreaders.The Miller 874 Soft Tripod Case is a padded tripod carry case designed for the Miller DS single stage tripod systems. It has rigid sidewalls sandwiched between high density foam padding and a head-end cradle to protect the tripod and fluid head from heavy bumps during flight and vehicle transport. It has a weatherproof Cordura construction with heavy duty zippers on the bag and the interior pocket. The case is carried by either the padded interlocking carry straps or the padded shoulder strap.Miller fluid head pan and tilt technologySuitable for payloads between 4.4 to 11 lbBuilt for rugged outdoor shooting conditionsRemovable stud allowing head to be mounted on a solopod and slider via a 3/8" threadOptional second pan handle mount
Compatibility
Solo Strap (1520), Solo 75 2-Stage Alloy Tripod (1630), Solo Dolly (394), Air Accessory Mounting Block (2092), Fixed Length Pan Handle for Air Fluid Heads (682)Speedy set-up for all lightweight tripods Quick release attachment pins Integrated in DS5 and DS10 systems with lightweight tripods1000 denier water-resistant Cordura fabricRigid sidewalls sandwiched between high density EVA foam padding Head-end cradle protects fluid head from heavy bumps during flight and vehicle transport Padded interlocking carry straps and padded shoulder strap1 Interior accessory pocket Heavy duty zippers on bag and pocket ID windowCompatible with;
- Miller DS single stage system tripod
| Camera Plate Features | Sliding Balance Plate, Quick Release |
| Base Mount | 75 mm Half Ball |
| Drag Control | Pan: 3-Step Plus 0 |
| Drag Type | Fluid |
| Vertical Tilt | +90° to -75° |
| Panning Range | 360° |
| Load Capacity | 4.4 to 11 lb / 2 to 5 kg |
| Counter Balance | Incremental 2-Step |
| Included Pan Handle Length | 15" / 390 mm |
| Bubble Level | 1 |
| Operating Temperature | -40 to 149°F / -40 to 65°C |
| Dimensions | 5.4" / 137 mm |
| Weight | 3.1 lb / 1.4 kg |
| Package Weight | 2.63Kg |
| Box Dimensions (LxWxH) | 36.32cm x 26.42cm x 22.10cm |
| Head Mount Type | 75 mm Bowl |
| Load Capacity | 44 lb / 20 kg |
| Maximum Working Height | 52.4" / 133 cm |
| Minimum Working Height | 24.4" / 62 cm |
| Folded Length | 32.7" / 83 cm |
| Materials | Aluminum |
| Weight | 5.5 lb / 2.5 kg |
| Leg Sections | 2 |
| Package Weight | 10.7 lb |
| Box Dimensions (LxWxH) | 37 x 13 x 1.5" |
| Construction | Aluminum |
| Type | Above-Ground |
| Adjustable | No |
| Minimum Length | 12.0" |
| Maximum Length | Not-Applicable |
| Weight | 0.6 lbs |
| Package Weight | 1.2 lb |
| Box Dimensions (LxWxH) | 18.1 x 6.7 x 6.3" |
| Dimensions | 2.7" (70 mm) |
| Weight | 8 oz (210 g) |
| Package Weight | 0.74 lb |
| Box Dimensions (LxWxH) | 7.2 x 5.55 x 5.4" |
| Carrying/Transport Options | Connecting Handles, Shoulder Strap |
| Type of Closure | Zipper |
| Exterior Material | Cordura |
| Padded | Yes |
| Interior Dimensions | ø: 7.1 x L: 41.1" / ø: 18.0 x L: 104.4 cm |
| Weight | 4.6 lb / 2.1 kg |
| Package Weight | 6 lb |
| Box Dimensions (LxWxH) | 38.3 x 10.4 x 10.3" |
In The Box
- 1 x Miller Air Fluid Head
- 1 x Miller Toggle 75 1-Stage Alloy Tripod (Mid-Level Spreader Ready)
- 1 x Miller 835 Non-Adjustable Above-Ground Tripod Spreader - for 440 Tripod
- 1 x Miller 550 Rubber Feet Pads for Select Tripods (Set of 3)
- 1 x Miller 874 Soft Tripod Case - for DS 1-Stage Systems (Except with HD Tripod)
Miller AIR Toggle LW Alloy System
The Air Fluid Head from Miller is constructed of light weight hi-strength die-cast alloy and rigid composite polymers, incorporating advanced precision fluid drag and two positions of counterbalance, with the ability to handle a wide range of payloads from 4.4 to 11 lb. The fluid drag system employs smooth start and soft stop technology, well balanced diagonal drag transitions and consistent drag resistance over temperatures ranging from -40 to 149°F.The Miller Toggle 1-Stage Alloy Tripod is designed to be a compact yet sturdy platform for your 75mm ball-base fluid head. The single-stage design allows for a 24.4 to 52.4" height range while maintaining a folded length of 32.7". Each stage features its own rotary clamp for secure locking, enabling support for payloads up to 55 pounds. Compatible spreaders, rubber feet, and dollies are available separately.A Mid-Level Spreader is chosen when shooting is often performed on uneven surfaces, such as steps, rocky ground, slopes. It allows for rapid set-up and pull down by keeping tripod legs at an equal or preset distance relative to each other. Attaches to the center bracket of a tripod and folds down within tripod without having to take it off.The 550 Tripod Feet from Miller are a set of three rubber snap-on feet designed to be used in any situation where the integrated dual spiked feet are not optimal. They are ideal for use on both slippery and glossy floors. These rubber feet are compatible with all tripods featuring 835 and 508 above ground spreaders.The Miller 874 Soft Tripod Case is a padded tripod carry case designed for the Miller DS single stage tripod systems. It has rigid sidewalls sandwiched between high density foam padding and a head-end cradle to protect the tripod and fluid head from heavy bumps during flight and vehicle transport. It has a weatherproof Cordura construction with heavy duty zippers on the bag and the interior pocket. The case is carried by either the padded interlocking carry straps or the padded shoulder strap.Miller fluid head pan and tilt technologySuitable for payloads between 4.4 to 11 lbBuilt for rugged outdoor shooting conditionsRemovable stud allowing head to be mounted on a solopod and slider via a 3/8" threadOptional second pan handle mount
Compatibility
Solo Strap (1520), Solo 75 2-Stage Alloy Tripod (1630), Solo Dolly (394), Air Accessory Mounting Block (2092), Fixed Length Pan Handle for Air Fluid Heads (682)Speedy set-up for all lightweight tripods Quick release attachment pins Integrated in DS5 and DS10 systems with lightweight tripods1000 denier water-resistant Cordura fabricRigid sidewalls sandwiched between high density EVA foam padding Head-end cradle protects fluid head from heavy bumps during flight and vehicle transport Padded interlocking carry straps and padded shoulder strap1 Interior accessory pocket Heavy duty zippers on bag and pocket ID windowCompatible with;
- Miller DS single stage system tripod
| Camera Plate Features | Sliding Balance Plate, Quick Release |
| Base Mount | 75 mm Half Ball |
| Drag Control | Pan: 3-Step Plus 0 |
| Drag Type | Fluid |
| Vertical Tilt | +90° to -75° |
| Panning Range | 360° |
| Load Capacity | 4.4 to 11 lb / 2 to 5 kg |
| Counter Balance | Incremental 2-Step |
| Included Pan Handle Length | 15" / 390 mm |
| Bubble Level | 1 |
| Operating Temperature | -40 to 149°F / -40 to 65°C |
| Dimensions | 5.4" / 137 mm |
| Weight | 3.1 lb / 1.4 kg |
| Package Weight | 2.63Kg |
| Box Dimensions (LxWxH) | 36.32cm x 26.42cm x 22.10cm |
| Head Mount Type | 75 mm Bowl |
| Load Capacity | 44 lb / 20 kg |
| Maximum Working Height | 52.4" / 133 cm |
| Minimum Working Height | 24.4" / 62 cm |
| Folded Length | 32.7" / 83 cm |
| Materials | Aluminum |
| Weight | 5.5 lb / 2.5 kg |
| Leg Sections | 2 |
| Package Weight | 10.7 lb |
| Box Dimensions (LxWxH) | 37 x 13 x 1.5" |
| Construction | Aluminum |
| Type | Above-Ground |
| Adjustable | No |
| Minimum Length | 12.0" |
| Maximum Length | Not-Applicable |
| Weight | 0.6 lbs |
| Package Weight | 1.2 lb |
| Box Dimensions (LxWxH) | 18.1 x 6.7 x 6.3" |
| Dimensions | 2.7" (70 mm) |
| Weight | 8 oz (210 g) |
| Package Weight | 0.74 lb |
| Box Dimensions (LxWxH) | 7.2 x 5.55 x 5.4" |
| Carrying/Transport Options | Connecting Handles, Shoulder Strap |
| Type of Closure | Zipper |
| Exterior Material | Cordura |
| Padded | Yes |
| Interior Dimensions | ø: 7.1 x L: 41.1" / ø: 18.0 x L: 104.4 cm |
| Weight | 4.6 lb / 2.1 kg |
| Package Weight | 6 lb |
| Box Dimensions (LxWxH) | 38.3 x 10.4 x 10.3" |
In The Box
- 1 x Miller Air Fluid Head
- 1 x Miller Toggle 75 1-Stage Alloy Tripod (Mid-Level Spreader Ready)
- 1 x Miller 835 Non-Adjustable Above-Ground Tripod Spreader - for 440 Tripod
- 1 x Miller 550 Rubber Feet Pads for Select Tripods (Set of 3)
- 1 x Miller 874 Soft Tripod Case - for DS 1-Stage Systems (Except with HD Tripod)
0 Reviews Hide Reviews Show Reviews
Related Products
Miller
Miller CX10 Toggle 2-Stage Alloy GS Tripod System (402G)
Miller