Audinate Dante AVIO 1-Channel XLR Analog Output Adapter for Dante Audio Network
Audinate Dante AVIO 1-Channel XLR Analog Output Adapter for Dante Audio Network
SKU:
ADP-DAO-AU-0X1
Availability:
Call for Availability
Write a Review
Audinate
Audinate Dante AVIO 1-Channel XLR Analog Output Adapter for Dante Audio Network
The Audinate Dante AVIO 1-Channel Analog Output Adapter allows you to use the analog gear you already own with your Dante audio network. It provides audio engineers with a cost-effective solution for adapting analog power amplifiers, powered speakers, or analog compressors and equalizers, delivering the interoperability, performance, and scalability of Dante network connectivity.Compact and built for the road, the AVIO is automatically discovered by the network and is ready to use when connected. It features one balanced, line-level output equipped with an XLR connector and delivers high-quality audio at up to 24-bit/96 kHz with configurable gain and attenuation, low total harmonic distortion, and a 20 Hz to 20 kHz frequency response.The AVIO supports Dante Audio over IP and AES67 RTP transport formats, and is compatible with Dante Domain Manager (DDM)..
Key Features. Cost-effective solution for adapting analog gear to your Dante networkPlug-and-play operation Balanced, line-level single-channel analog output adapterCompact and built for the road with sonically welded polycarbonate enclosureSample rates up to 96 kHzWide dynamic rangeHigh signal-to-noise ratioLow total harmonic distortionConfigurable gain and attenuationDante Audio over IP and AES67 RTP transport formatsPower over Ethernet (PoE) supportCompatible with Dante Domain Manager (DDM).
- Use Analog Gear with Dante Network
- 1 x XLR, Line-level Analog Output
- Plug-and-Play Operation
- Compact and Built for the Road
- Audio Resolution up to 24-Bit / 96 kHz
- Configurable Gain and Attenuation
- Compatible with Dante Domain Manager
- Dante Audio Over IP & AES67 RTP Formats
Audinate Dante AVIO 1-Channel XLR Analog Output Adapter for Dante Audio Network
The Audinate Dante AVIO 1-Channel Analog Output Adapter allows you to use the analog gear you already own with your Dante audio network. It provides audio engineers with a cost-effective solution for adapting analog power amplifiers, powered speakers, or analog compressors and equalizers, delivering the interoperability, performance, and scalability of Dante network connectivity.
Compact and built for the road, the AVIO is automatically discovered by the network and is ready to use when connected. It features one balanced, line-level output equipped with an XLR connector and delivers high-quality audio at up to 24-bit/96 kHz with configurable gain and attenuation, low total harmonic distortion, and a 20 Hz to 20 kHz frequency response.
The AVIO supports Dante Audio over IP and AES67 RTP transport formats, and is compatible with Dante Domain Manager (DDM).
Key Features
- Cost-effective solution for adapting analog gear to your Dante network
- Plug-and-play operation
- Balanced, line-level single-channel analog output adapter
- Compact and built for the road with sonically welded polycarbonate enclosure
- Sample rates up to 96 kHz
- Wide dynamic range
- High signal-to-noise ratio
- Low total harmonic distortion
- Configurable gain and attenuation
- Dante Audio over IP and AES67 RTP transport formats
- Power over Ethernet (PoE) support
- Compatible with Dante Domain Manager (DDM)
Applications
- Send audio to analog power amplifiers and powered speakers over a Dante audio network
- Patch DSPs, analog compressors and equalizers into a Dante system using a combination of Dante AVIO input and output adapters
- Create easy drop points for connecting overflow areas to a Dante network
- Connect non-networked hearing aid loop amplifiers to your Dante audio network
| Maximum Signal Level | +18 dBu, +4 dBu, 0 dBu (Balanced) 0 dBV, -10 dBV (Balanced) |
| Frequency Response | 20 Hz to 20 kHz (±0.5 dB) |
| Impedance | 150 Ohms (Balanced) 75 Ohms (Unbalanced) |
| Dynamic Range | >100 dB |
| Signal-to-Noise Ratio | >100 dB |
| Total Harmonic Distortion | |
| Connectors | RJ45 1 x XLR-M |
| Power | Class 1 802.3af PoE |
| Sample Rates | 44.1, 48, 96 kHz |
| Bit Depth | 24-bit |
| Network Transport Protocol | Dante Audio over IP AES67 RTP |
| Construction | Sonically Welded Polycarbonate Enclosure |
| Packaging Info | |
| Package Weight | 0.35 lb |
| Box Dimensions (LxWxH) | 9.2 x 8.6 x 7.9" |
In The Box
- 1 x Audinate Dante AVIO 1-Channel XLR Analog Output Adapter for Dante Audio Network
- 1 x Limited 1-Year Warranty
0 Reviews Hide Reviews Show Reviews
Related Products
Audinate
Audinate Dante AVIO 2-Channel XLR Analog Output Adapter for Dante Audio Network
Audinate
Audinate Dante AVIO 1-Channel Analog Input Adapter for Dante Audio Network
Audinate
Audinate Dante AVIO 2-Channel Analog Input Adapter for Dante Audio Network
Audinate