null

Sennheiser e 604 Microphone Dynamic Instrument Microphone (3-Pack)

SKU: 506667
(No reviews yet) Write a Review
$640.00
(Inc. GST)
$556.52
(Ex. GST)

Call for Availability

At a glance:

The Sennheiser e 604 Microphone is a rugged, cardioid instrument microphone that is specially designed to handle the high sound pressure levels of drums, percussion, woodwind, and brass instruments without distortion. It captures frequencies between 40 Hz and 18 kHz, doing so at sound pressure levels in excess of 160 dB without nasty distortion.Based on the design of the well-regarded MD 421 microphone, the e 604 features a dynamic transducer, which does not require phantom power, and its cardioid polar pattern is effective in minimizing pickup and feedback at the off-axis sections of the capsule. An integral stand mount screws directly onto mic stands, but the included clip of the microphone attaches the microphone to the rim of a drum or the bell of saxophones.

A slight bump between 4 and 5 kHz allows instruments to cut through the mix. Here, three e 604 microphones are bundled together for your convenience. With these three mics, you could capture the snare, rack tom, and floor tom of a drumset.

  • Dynamic Element Microphone
  • Based on MD 421 Design
  • For Drums & Woodwind Instruments
  • Cardioid Polar Pattern
  • Handles SPLs over 160 dB
  • 40 Hz to 18 kHz Frequency Response
  • Fast Transient Response
  • Reinforced-Fiberglass Body
  • Integrated Clip Mount
  • 3 Microphones in 1 Package

Sennheiser e 604 Microphone Dynamic Instrument Microphone (3-Pack)

The Sennheiser e 604 Microphone is a rugged, cardioid instrument microphone that is specially designed to handle the high sound pressure levels of drums, percussion, woodwind, and brass instruments without distortion. It captures frequencies between 40 Hz and 18 kHz, doing so at sound pressure levels in excess of 160 dB without nasty distortion.

Based on the design of the well-regarded MD 421 microphone, the e 604 features a dynamic transducer, which does not require phantom power, and its cardioid polar pattern is effective in minimizing pickup and feedback at the off-axis sections of the capsule. An integral stand mount screws directly onto mic stands, but the included clip of the microphone attaches the microphone to the rim of a drum or the bell of saxophones. A slight bump between 4 and 5 kHz allows instruments to cut through the mix. 

Here, three e 604 microphones are bundled together for your convenience. With these three mics, you could capture the snare, rack tom, and floor tom of a drumset. Another usage could be three different horns within a horn section. The decision is yours—with three microphones at your disposal, there are quite a few options indeed.

Key Features at a Glance

  • Based on MD 421 microphone design.
  • Compact dynamic microphone
  • Handles sound pressure levels of 160 dB and above without distortion
  • Impact-resistant fiberglass-reinforced housing
  • Simple handling and flexible positioning
  • Low sensitivity to handling noise
  • Humbucking coil
  • Integral stand mount
TransducerDynamic
Polar PatternCardioid
Frequency Response40 Hz to 18 kHz
Sensitivity1.8 mV/PA (at 1 kHz)
SPL>160 dB
Nominal Impedance350 Ohms
Minimum Terminating Impedance1 kOhm
ConnectorXLR 3-pin
Dimensions1.3 x 2.3" / 33 x 59 mm
Weight2.1 oz / 60 g
Packaging Info
Package Weight2.405 lb
Box Dimensions (LxWxH)10.4 x 9.65 x 5.15"

In The Box

  • 1 x Sennheiser e 604 Microphone Dynamic Instrument Microphone (3-Pack)
  • 1 x Drum Clip
  • 1 x Protective Pouch
  • 1 x Limited 2-Year Warranty
Compare