null

The DVT showroom is open from 10am until 3pm until further notice. Apologies for any incovenience caused.

Rode Complete Studio Kit with AI-1 Audio Interface, NT1 Microphone, SM6 Shockmount, and XLR Cable

SKU: NT1AI1KIT
(No reviews yet) Write a Review
$630.00
(Inc. GST)
$547.83
(Ex. GST)

In Stock

At a glance:

Combining a redesigned true condenser capsule, ultralow-noise transformerless circuitry, and an extremely durable housing, the Rode NT1-KIT large-diaphragm cardioid microphone is well suited for high-resolution digital recording of vocal and instrument sources at home, in the studio, or even on stage. Plus, its bundle of accessories—shockmount, pop filter, XLR cable, and dust cover—help the NT1-KIT serve singers, rappers, and podcasters especially well. While the body of the NT1 still resembles the NT1-A, the mic has been completely revamped except for the mesh grille. It features Rode's updated HF6 capsule, which is designed to provide a detailed midrange response with smooth highs and warm bass.

The HF6 capsule is suspended inside the microphone using Rycote's industry-leading Lyre system to help reduce vibration and handling noises. Also, with self-noise measured at only 4.5 dBA, the NT1 is an exceedingly quiet microphone.

  • Desktop 1x2 USB Type-C Audio Interface
  • Large-Diaphragm Cardioid Condenser Mic
  • Shockmount Inhibits Vibration Noise
  • Pop Filter Controls Vocal Plosives
  • XLR Mic Cable and USB Cable
  • Cardioid Pattern Reduces Ambient Noise
  • Up to 24-Bit / 96 kHz Resolution
  • Built-In Discrete Headphone Amplifier
  • Zero-Latency Monitoring
  • Includes Ableton Live Lite DAW Software

Rode Complete Studio Kit with AI-1 Audio Interface, NT1 Microphone, SM6 Shockmount, and XLR Cable

Combining a redesigned true condenser capsule, ultralow-noise transformerless circuitry, and an extremely durable housing, the Rode NT1-KIT large-diaphragm cardioid microphone is well suited for high-resolution digital recording of vocal and instrument sources at home, in the studio, or even on stage. Plus, its bundle of accessories—shockmount, pop filter, XLR cable, and dust cover—help the NT1-KIT serve singers, rappers, and podcasters especially well.

While the body of the NT1 still resembles the NT1-A, the mic has been completely revamped except for the mesh grille. It features Rode's updated HF6 capsule, which is designed to provide a detailed midrange response with smooth highs and warm bass. The HF6 capsule is suspended inside the microphone using Rycote's industry-leading Lyre system to help reduce vibration and handling noises. Also, with self-noise measured at only 4.5 dBA, the NT1 is an exceedingly quiet microphone. Since it can run on 24 or 48 VDC phantom power, the NT1 can be used with a variety of professional and entry-level XLR mic preamps

Primary ApplicationsLive Sound, Studio Recording
Form FactorLarge Diaphragm Mic / Stand/Boom Mount
Intended Sound SourcesVocals, Speech/Voice Over, Instrument
Sound FieldMono
Operating PrinciplePressure Gradient
Capsule1 x Condenser
Diaphragm1" / 25.40 mm
Polar PatternCardioid
OrientationSide Address
CircuitrySolid-State (JFET)
PadNone
High-Pass FilterNone
Tone AdjustmentNone
Gain AdjustmentNone
IndicatorsNone
On-Board ControlsNone
WindscreenNone
Frequency Range20 Hz to 20 kHz
Maximum SPL132 dB SPL
Impedance100 Ohms
Sensitivity-29 dBV/Pa at 1 kHz
Output Level8 mV (Max, 1 kHz)
Dynamic Range128 dB
Signal-to-Noise Ratio90 dB A-Weighted
Equivalent Noise Level4.5 dB A-Weighted
Output Connectors (Analog)1 x XLR 3-Pin Male (on Mic)
Headphone ConnectorNone
Bus PowerNone
Operating Voltage24 V (Phantom Power)
48 V (Phantom Power)
ColorBlack
MountingShockmount (Included)
Included CaseNone
Included FiltersPop Filter
Construction MaterialAluminum
Dimensionsø: 2 x L: 7.4" / ø: 5 x L: 18.7 cm
Weight15.5 oz / 440 g
Package Weight2.25Kg
Box Dimensions (LxWxH)26.67cm x 20.96cm x 17.14cm
Form FactorTabletop
Channels of I/O1 Input / 2 Output
Max Sample Rate/Resolution96 kHz / 24-Bit
Number of Mic Preamps1
Analog Audio I/O1 x Combo XLR-1/4" TRS Mic/Line Input
2 x 1/4" TRS Balanced Line Output
1 x 1/4" TRS Headphone Output
Phantom Power+48 V
Digital Audio I/ONone
Host Connection / USBUSB Type-C
MIDI I/ONone
Frequency Response20 Hz to 20 kHz ±1 dB
Gain/Trim RangeInputs:
0 to 45 dB
Max Output LevelMonitor Outputs:
-6 dBu
Headphone Output Power24 mW into 32 Ohms
245 mW into 300 Ohms
ImpedanceHi-Z Inputs:
0.9 Megohm
Mic Inputs:
1.3 Kilohms
Dynamic Range104 dBu
EIN-128 dBA
Sample Rates44.1 / 48 / 88.2 / 96 kHz
Bit Depths24-Bit
LatencyZero-Latency Direct Monitoring
OS CompatibilitymacOS 10.10 or Later
Windows 7 or Later
Dimensions4.9 x 3.9 x 1.5" / 124 x 100 x 38 mm
Weight19.8 oz / 561.3 g
Package Weight1.155 lb
Box Dimensions (LxWxH)7 x 5.1 x 2.55"

In The Box

  • 1 x Rode NT1-KIT Large-Diaphragm Cardioid Condenser Microphone
  • 1 x Rode AI-1 Studio-Quality USB Audio Interface
Compare